Where the chimney leak starts, found and fixed in Sailboat Bend
Your leak history, the roof, the attic and the firebox are read together before any repair is proposed.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Water marks that suggest a chimney leak
- Rust flakes on the firebox floor
- Powdery white residue on the brick
- Dripping sounds inside the chimney in rain
- Wet attic insulation around the chimney
Jump to
Stopping a chimney leak at the right part
What a hose check cannot promise
A hose water test only helps when its limits are understood. A garden hose cannot fully copy wind-driven rain, and an intermittent leak may not appear during a short test even when the path is real. A dry result is information, not proof that nothing is wrong.
We tell you plainly what a test showed and what it did not. If the leak did not appear, the findings list the paths that remain possible and how else they might be checked. That keeps the next step honest rather than guessed.
Water soaking through brick and mortar
Brick and mortar absorb water, and open or eroded joints let in more. In long rain a chimney can take in enough water for it to travel through the wall and appear inside. The inside face of a chimney breast may feel damp or show a stain after heavy weather.
We look for eroded joints, cracked brick and flaking faces on the outside of the stack. Where the masonry is the path, the estimate lists the specific masonry repairs first. A water-repellent treatment may come after them, but it is not a substitute for rebuilding what is missing.
Cracked stucco on a leaking chimney
If your chimney is finished in stucco, cracks in the finish can let water in behind it. On a masonry chimney, the water soaks into the block or brick. On a framed chase, it can reach the sheathing and framing, which is more serious.
We look for cracks, hollow-sounding patches and stains below the cracks. The findings say whether the stucco is the likely path and whether the structure behind it needs checking. Stucco repair is written as its own item, with any hidden damage assessed separately.
If the water comes back after a repair
A repaired chimney that leaks again does not by itself mean the repair failed. It may mean a second path that was masked by the first, or a path that only opens in certain weather. Either way, the next step is to look again with the new evidence.
Tell us promptly and leave the marks in place. We check the repaired part first. If our work is at fault, the workmanship warranty covers putting it right. If the water is coming from somewhere else, we explain what we found and quote that path separately.
Parts of a chimney leak job we price
- Damper and smoke shelf water marks
- Paths confirmed, likely and unknown
- Temporary protection listed on its own
- Written record of the completed repair
Leak questions answered for Sailboat Bend
Where does water usually get into a leaking chimney?
The usual entry points are the top of the flue, a cracked crown, the roof junction, the masonry faces and, on framed chimneys, the chase cover. Where the water shows inside gives a first clue, and the inspection confirms which part is responsible.
Is the leak coming from the chimney or from the roof?
That is one of the first things we sort out. We check the chimney top, the roof junction, the masonry and the roofing nearby, and look for other roof openings close to the chimney. The findings say which one the evidence supports.
Can a missing cap let rain reach the firebox?
Yes. An uncovered flue lets rain fall straight onto the smoke shelf, the damper and the firebox floor. Rust flakes and wet debris there are typical signs. The cap work is quoted as its own item once the top is confirmed as the path.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo