Insulated flue liners fitted in Harbour Inlet
Between visits the chimney top is closed off, and the debris leaves with us when the work ends.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that a flue needs relining in Harbour Inlet
- Broken clay pieces in the fireplace
- No lining visible from the chimney top
- Two appliances sharing one chimney
- Glazed deposits coating the old flue
Jump to
Planning the liner your appliance needs
What happens to the old damper during relining
When a liner runs down to an appliance, the existing throat damper can stand in the way. Its plate or frame may have to come out for the liner to pass. That changes how the fireplace opening works afterwards, so it is not a detail to skip.
The estimate says whether the damper stays, is removed, or is left as found. If you want the fireplace to work as an open fireplace later, tell us now. Damper repair and top-mounted dampers are their own services, and we keep them separate from the liner price.
Rain entering a relined flue
A liner's cap and top plate are meant to keep rain out of the pipe. If water still reaches the appliance after relining, the cause may be the cap, the plate seal or another part of the chimney. Each has a different fix.
Tell us when the water appears and how much you see. A hose water test, used only when the job calls for it, helps tell one source from another. The finding is explained before any repair is proposed, and the repair is priced on its own line.
Relining work for a home in Harbour Inlet
Relining work for a home in Harbour Inlet follows the same state code as any other Florida home. The code, the liner listing and the appliance manual set the requirements. Our job is to apply them to your chimney and explain each step.
That means an assessment, a written estimate and your approval before work. It also means a written record once the liner is in. You save 10% when the agreed relining is booked no later than 72 hours after your free inspection. Nothing is ordered until you approve the plan.
Leaving sound clay tile in place around a liner
Existing clay tiles may remain around a new liner when their condition, the available space and the selected lining system permit it. Broken tile, inadequate clearance or deposits that cannot be removed may require additional preparation or removal. The liner instructions and the condition of the complete flue determine the approach; tile condition alone does not settle the decision.
The estimate says whether the tile stays and why. If broken sections are removed and the rest kept, it says which. The written record repeats the decision, so a later inspection knows what surrounds the liner without having to guess. Keeping tile is a judgment made on evidence, not on convenience.
What our liner assessment covers
- Liner cap with its spark screen
- Wall opening sealed around the tee
- Cleaning access explained after installation
- Exclusions listed in plain words
Chimney relining questions and answers
How do you decide what size liner my chimney needs?
We start from the appliance manual, which states the flue size the appliance requires, and the code rule that a flue may not be smaller than the appliance connector. Then we check whether the passage can take that size along its whole route.
What happens to my damper when the liner is installed?
If the liner runs down to an appliance, the damper plate or frame may have to come out for it to pass. The estimate says whether the damper stays or goes, and any damper repair is priced separately from the liner.
Can a liner help if my fireplace has weak draft?
It can when the problem is an oversized, damaged or unlined flue. Draft also depends on the opening, the chimney height and other factors. We explain what the inspection finds and do not promise a liner will cure every draft issue.
More Ways to Care for Your Fireplace
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo