Listed chimney liners installed in Miami Shores
A liner chosen for the appliance you actually plan to run in Miami Shores, not for the last one.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Flue lining trouble you may notice
- Broken clay pieces in the fireplace
- A new appliance that needs a lined flue
- A metal liner with no label
- Rust holes in an old liner
Jump to
Chimney liner installation, from sizing to cap
When the appliance connects through the chimney wall
Some appliances connect to the chimney through a hole in its side rather than through the fireplace opening. For that arrangement the code calls for the inlet to enter from the side through a thimble, so the connector can neither slip out nor reach past the liner wall. Liner systems handle this connection with a tee fitting.
A tee usually includes a removable cap at its base for cleaning access. We look at the existing wall opening, the thimble and the connector route before choosing the fitting. If the opening needs work to accept the tee, that is described in the estimate as part of the connection.
Offsets in the flue and flexible liners
Not every flue rises straight from the fireplace to the top. Offsets and bends limit what kind of liner can pass and how it is supported. Flexible liners can follow some bends that rigid pipe cannot, within the limits the maker publishes.
We check the route before recommending flexible or rigid pipe. An offset may also limit the liner size that fits, which feeds back into the sizing question. If the route cannot take the liner the appliance needs, that is explained before the estimate is final, not discovered on installation day.
Restoring the fireplace surround after relining
Sometimes a surround or trim piece blocks the connection at the bottom of the flue. It may need to come off and go back on. That is part of the job, and it should be planned rather than improvised on the day.
The estimate says whether anything at the fireplace face will be disturbed and how it will be put back. If the material is fragile or hard to replace, tell us before the visit. We describe the risk plainly and agree the approach with you, so there are no surprises at the end.
How a liner is held in place
Many flexible liners hang from the top plate, while some installations also use support at the base or at a tee. The manual describes which supports are required for the form of liner used. An unsupported run can shift or sag over time.
We install the supports the manual calls for and describe them in the written record. If the chimney top cannot provide a sound bearing surface, that is addressed before installation. The support method appears in the estimate alongside the liner itself. Support hardware comes from the same system as the liner.
What our liner assessment covers
- Damper plate removal where required
- Unused flue closure as a separate item
- Room protection at the fireplace opening
- Written record of the liner installed
Chimney liner questions, answered plainly
Can a liner go inside the clay tile that is already there?
That depends on space and condition. If the old tile leaves room for the liner and whatever insulation its listing needs, it can usually stay. Broken sections that block the route, or a passage that is too tight, may require removal before installation.
Who handles the appliance itself during relining in Miami Shores?
Our work covers the liner, its top parts and the connection agreed in the estimate. If another company installs or services the appliance, we describe exactly where our scope ends so nothing falls between the two jobs.
Does relining change how my chimney looks from outside?
Usually only the top changes, where the top plate and the liner cap sit above the crown. If a wall connection is involved, the tee opening is finished and sealed. We describe any visible change in the estimate before work starts.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo