Listed chimney liners installed in North Lauderdale
A listed liner, installed to its manual, with a written record of the work when the job is done.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What points toward a new chimney liner
- Water reaching the appliance from above
- Gaps between flue tiles seen from above
- Soot around the appliance connection
- A cracked tile at the top of the flue
Jump to
What goes into relining your chimney
An existing metal liner of unknown origin
Some chimneys already hold a metal liner that nobody can identify. Without a label or paperwork, it is hard to know what it was listed for or whether it suits the current appliance. That uncertainty is a reason to assess it rather than assume it is fine.
Look for any tag at the top plate or the appliance connection, and share old invoices if you have them. We explain what we can confirm and what we cannot. Replacing an unidentified liner is one option, and the estimate says why it is recommended when it is.
After a chimney fire, the liner is checked
Liner manuals ask that the system be inspected before further use after a chimney fire. Heat can warp or damage parts in ways that are not visible from the fireplace. The appliance and connector also need attention before anything is lit again.
If a fire has happened in your chimney, tell us when you arrange the visit, and leave the appliance unused meanwhile. We look at the liner, the top plate and the connection as far as they are accessible. The findings and any replacement are explained before any work begins.
The connector between appliance and liner
The pipe or adapter that joins the appliance to the liner is a short part with a large job. It must fit both the appliance outlet and the liner system. The appliance manual describes what it accepts.
We check the existing connector when we assess the flue. If it is damaged or the wrong type, replacing it is listed separately from the liner. The written record names the connector used, which helps anyone who services the appliance later and saves them a guess. A connector that does not match the liner can undo an otherwise sound installation.
A follow-up look at a new liner
After a period of use, a relined flue can show whether the connection and top parts are behaving as planned. Deposits, rattles at the cap or smoke at the appliance are worth telling us about. None of these should be ignored.
Describe what you notice and when it happens. A follow-up visit can check the connection, the cap and the liner interior. If a workmanship issue is found, our workmanship warranty addresses it, and we explain what was corrected. Early attention to small signs keeps them small.
Liner scope written out in full
- Appliance make, model and fuel confirmed
- Listed liner system named in writing
- Debris cleaned up and hauled away
- Start-up guidance from the appliance manual
Liner installation answers in North Lauderdale
How do you decide what size liner my chimney needs?
We start from the appliance manual, which states the flue size the appliance requires, and the code rule that a flue may not be smaller than the appliance connector. Then we check whether the passage can take that size along its whole route.
What should I have ready for the free inspection?
The appliance make and model, its manual if you have it, and any earlier inspection wording about the lining. Old invoices for chimney work help too. If you cannot find these, we locate the model label during the visit.
Can a liner help if my fireplace has weak draft?
It can when the problem is an oversized, damaged or unlined flue. Draft also depends on the opening, the chimney height and other factors. We explain what the inspection finds and do not promise a liner will cure every draft issue.
More Ways to Care for Your Fireplace
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo