Listed chimney liners installed in The Crossings
Relining explained in plain terms, with the reason for every line of the estimate.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Liner warning signs worth a closer look
- Rust holes in an old liner
- Two appliances sharing one chimney
- A stale odor drifting from the flue
- Loose parts rattling at the chimney top
Jump to
The liner work behind a sound flue in The Crossings
Clearances around a relined chimney
The code requires an air space between a masonry chimney and nearby combustible framing. It makes an exception where the chimney carries a lining system listed for contact with combustibles and installed to its instructions. That exception depends on the specific listing, not on relining in general.
If framing around your chimney sits closer than it should, relining may be part of the answer, or it may not. We explain what we can see at the accessible points and which clearances remain concealed. The proposal says whether the chosen liner carries that listing and how it is installed.
Using the appliance after relining
After installation, the appliance's own manual governs how it is started and used. We explain which parts of the liner need no attention and which deserve a look later. Watch the early fires for smoke at the opening or an unusual odor.
If something seems wrong, stop using the appliance and tell us what you saw. We come back to check the connection and the cap. Our workmanship warranty covers how the liner was installed, and we explain what it includes when the job is handed over.
Chimney height and a relined flue
A liner does not change how tall the chimney is, and height affects draft. Engineering guidance on fireplace chimneys ties draft to the fireplace opening, the flue area and the chimney height together. Changing one without the others can shift the balance.
If draft was weak before relining, tell us. We look at whether the liner size, the opening and the height are working together. The proposal does not promise that a liner alone will cure a draft problem it was not designed to solve. Where height is part of the issue, that becomes a separate conversation.
Top-vented and rear-vented appliance connections
Appliances do not all send their flue gases out the same way. Some vent from the top and some from the rear, and liner systems use different connectors for each. The DuraLiner manual, for instance, shows separate arrangements for the two.
We look at where your appliance vents before choosing the fitting. A rear outlet may call for a tee aligned with it, while a top outlet may take a direct adapter. The estimate names the connection so the appliance installer and our team work from the same plan.
What a liner estimate should spell out
- Liner size matched to the appliance manual
- Lower end transition above the smoke chamber
- Open chimney covered at each day's end
- Exclusions listed in plain words
Relining answers for homes in The Crossings
Can you reline a chimney that serves a gas-fired appliance?
Yes, where the fuel gas code and the appliance manual allow a chimney liner. The code accepts listed liners, clay lining or other approved material. The appliance's own venting type decides whether a chimney liner is appropriate at all.
Are the top plate and cap included in the relining price?
They belong to the liner system, so our relining estimate includes them. A larger cap covering several flues, or crown repair around the plate, would be listed separately if the inspection shows it is needed.
Can a liner help if my fireplace has weak draft?
It can when the problem is an oversized, damaged or unlined flue. Draft also depends on the opening, the chimney height and other factors. We explain what the inspection finds and do not promise a liner will cure every draft issue.
More Ways to Care for Your Fireplace
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo