Chimney liner installation for fireplaces in West Park
From the connector at the bottom to the cap at the top, the liner is planned as one system.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Flue lining trouble you may notice
- A crushed or kinked liner section
- Weak draft after an appliance change
- A liner cap that no longer fits
- A cracked tile at the top of the flue
Jump to
Chimney liner installation, from sizing to cap
A liner for an open fireplace follows other sizing rules
When the flue serves a masonry fireplace rather than a sealed appliance, the code sizes it against the fireplace opening. A liner that is too small for the opening can leave the fireplace short of draft. That makes relining an open fireplace a different calculation from relining for a stove.
Tell us whether you plan to keep burning in the open fireplace or connect an appliance later. The answer changes which rule governs the liner size. We explain the basis for our sizing in the estimate, so you can see which part of the code the proposal relies on.
Sealing the flue opening at the top plate
The top plate closes the gap between the liner and the old flue opening. Rain that gets past it runs down the outside of the liner, where it is hard to see. The manufacturer's instructions describe how the plate is fitted and sealed.
We fit the plate to the flue opening and follow the sealing steps in the manual. If the flue top is irregular or damaged, that is noted before installation. The written record says which top parts were installed and how they were secured.
Restoring the fireplace surround after relining
Sometimes a surround or trim piece blocks the connection at the bottom of the flue. It may need to come off and go back on. That is part of the job, and it should be planned rather than improvised on the day.
The estimate says whether anything at the fireplace face will be disturbed and how it will be put back. If the material is fragile or hard to replace, tell us before the visit. We describe the risk plainly and agree the approach with you, so there are no surprises at the end.
Leaving sound clay tile in place around a liner
Existing clay tiles may remain around a new liner when their condition, the available space and the selected lining system permit it. Broken tile, inadequate clearance or deposits that cannot be removed may require additional preparation or removal. The liner instructions and the condition of the complete flue determine the approach; tile condition alone does not settle the decision.
The estimate says whether the tile stays and why. If broken sections are removed and the rest kept, it says which. The written record repeats the decision, so a later inspection knows what surrounds the liner without having to guess. Keeping tile is a judgment made on evidence, not on convenience.
The relining lines you approve in West Park
- Liner cap with its spark screen
- Tee fitting for a wall connection
- Debris cleaned up and hauled away
- Start-up guidance from the appliance manual
Chimney relining questions and answers
What happens to my damper when the liner is installed?
If the liner runs down to an appliance, the damper plate or frame may have to come out for it to pass. The estimate says whether the damper stays or goes, and any damper repair is priced separately from the liner.
How long does a relining visit take in West Park?
It depends on the route and the preparation. A straightforward installation can be completed in one visit, while tile removal or glazed deposits add time. We explain the expected sequence when you approve the estimate and tell you if it changes.
Does a relined flue still need cleaning?
Yes. A liner gives flue gases a sound passage but does not stop deposits forming. The liner's manual explains how it should be cleaned and inspected, and maintenance visits from our team can include the liner, cap and top plate.
More Ways to Care for Your Fireplace
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo