
Restoring chimney brickwork in Biscayne Park
Tell us about the crack, the fallen piece or the stain. We link it to the masonry behind it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs the chimney brickwork needs attention
- Mortar that crumbles when touched
- Brick chips or sand on the roof
- Crumbling brick near the roof line
- Stains on the attic side of the chimney
Jump to
Brick, mortar and the cause behind the crack
Reading a crack before repairing it
Cracks in chimney masonry are not all alike. A fine crack along one mortar joint, a crack that runs through several bricks and a crack that steps diagonally along the joints each point to something different.
We note where a crack starts, which way it runs, whether it passes through bricks or only mortar and whether the two sides have shifted. That pattern tells us whether a masonry repair is enough or whether a cause such as movement needs attention first. The estimate explains which reading we reached and why.
Earlier patches in hard gray mortar
Many chimneys carry earlier repairs made with a hard cement-rich mortar, often smeared wider than the joint. That mortar can be stronger than the old brick around it. Movement and moisture then work through the brick instead of the joint.
Look for gray patches that do not match the older joints, with broken brick edges beside them. We point these out on the visit. Where they are causing damage, careful removal and repointing with a suitable mortar become part of the scope, listed so you can see the reason.
Same-day make-safe work, when available
When bricks are loose at height, making them safe quickly matters more than the full repair. Same-day service is available when the schedule allows. It can remove or secure loose units and protect the area below until the repair is done.
The permanent masonry repair usually needs materials, matched mortar and suitable weather, so it follows on an agreed date. The make-safe step and the repair are priced separately, and each waits for your approval. If the loose units can be reused, we set them aside for the repair.
When the masonry is past repair
Sometimes loose or broken masonry runs deep, earlier repairs keep failing or the top has shifted. At that point, repointing and replacing units may not hold, and taking the damaged section down becomes the sounder option.
Chimney rebuild covers dismantling to sound masonry and relaying it with new brick and a new top. We explain what we found, where sound masonry seems to begin and how the two options compare in scope and in expected life. You see both before deciding.
Masonry repair items we price separately
- Joint finish matched to the old profile
- Chimney breast cracks traced indoors
- Cover over open masonry each evening
- Structural check flagged where cracks suggest it
Masonry repair, asked and answered
Will you look at the crown and flashing during masonry work?
Yes. Water from a cracked top or a failed roof junction often causes the masonry damage in the first place. We note what we find there and list any repair to those parts as its own item.
Do you need to go on the roof for chimney masonry work?
For work above the roof line, usually yes. We plan the route and protection so the roof covering takes as little wear as possible, and we tell you if a roofer needs to lift any covering.
Can painted chimney brick be repaired?
Yes, though paint can hide damage and trap moisture. We look at where the paint is failing and what lies beneath. Whether to remove or renew the paint is a separate decision from the masonry repair.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
