Brick and mortar repairs on chimneys in Coconut Grove
Cracks, open joints and broken brick faces are traced to their cause before any mortar goes in.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What failing chimney brickwork looks like
- Top courses shifted out of line
- Hard gray patches over the old mortar
- Cracks in the chimney breast indoors
- Crumbling brick near the roof line
Jump to
What masonry repair means for your chimney
Earlier patches in hard gray mortar
Many chimneys carry earlier repairs made with a hard cement-rich mortar, often smeared wider than the joint. That mortar can be stronger than the old brick around it. Movement and moisture then work through the brick instead of the joint.
Look for gray patches that do not match the older joints, with broken brick edges beside them. We point these out on the visit. Where they are causing damage, careful removal and repointing with a suitable mortar become part of the scope, listed so you can see the reason.
A family team that talks through the masonry
We are a family-owned, locally owned company. The person who looks at your chimney walks you through the crack pattern, the likely cause and the repair options in plain terms before anything is priced.
Put your questions to us directly. Why does this joint need work, could a smaller repair do, and what would waiting mean for the brick? Those answers are part of the service. You will not be passed between departments to understand one line on a masonry estimate, and you can ask again later by phone.
New masonry blends in over time
New mortar and replacement brick often look brighter than the masonry around them for a while. Weather, dirt and sun gradually soften that contrast, so a repair that stands out at first may blend in later.
We talk about this before you approve, so you know what to expect. Where appearance matters most, a slightly larger repair area or a careful sample can reduce the contrast. If the contrast matters to you, say so before you approve, and we can plan the sample and the repair area with that in mind.
Mortar joints wear by design
Mortar is meant to wear before brick does. Over time, rain and sun erode the joint surface and soften the mortar behind it. Joints on the faces that take the most weather go first, often near the top.
Renewing worn joints is normal maintenance for masonry rather than a sign of poor construction. The question is how far the wear has gone. We describe the depth and extent in plain words so you can judge whether to repoint now or plan the work for later.
Priced masonry work for homes in Coconut Grove
- Cut-out and replacement of broken units
- Color sample for new mortar
- Shoulder surfaces reshaped to shed water
- Access equipment and roof protection
Chimney crack repair questions answered
What does chimney masonry repair usually include?
It covers the brick and mortar of the chimney: open joints repointed, broken units replaced and loose sections relaid. The estimate names each area and method, and any related work, such as the crown or flashing, is listed separately.
Do you replace single bricks or whole sections?
Both, depending on the damage. A few broken units can be cut out and replaced. When loose or damaged brick runs through several courses, relaying that section is usually the sounder repair.
Why did an earlier masonry repair on my chimney crack again?
Common reasons are water still reaching the masonry, continued movement or a repair mortar harder than the brick. We look for the reason before repeating anything, so the new repair addresses it.
More Ways to Care for Your Fireplace
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo