Restoring chimney brickwork in Parkland
Book the masonry work within 72 hours of your free inspection and save 10% on it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs the chimney brickwork needs attention
- Mortar that crumbles when touched
- Dark damp patches that stay after rain
- Paint peeling off chimney brick
- Stains on the attic side of the chimney
Jump to
A chimney mason's view of the damage
Bricks, joints and the stack they form
Chimney masonry works as three things at once. The bricks carry the load and face the weather. The mortar joints bind them and give movement and moisture a place to go. Together they form a stack that must stay plumb, tight to the house and sound at the top.
A repair that looks only at one of the three can miss the problem. Replacing a broken brick does little if the joints around it are failing, and new joints do little if the stack is moving. We look at all three before we suggest which one needs the work.
Paint on chimney brick
Paint on exterior brick can look tidy, but it can also hide cracks and hold moisture in the masonry. When water cannot dry outward, paint may blister or peel, sometimes taking the brick face with it.
We look at where the paint is failing and what lies underneath. A patch of peeling paint over a damp area often points to a water source that needs repair. Whether to remove, renew or leave the paint is a separate choice, priced apart from the masonry work.
Gutters spilling onto chimney brick
A gutter that overflows next to the chimney, or a downspout that empties against its base, can soak the masonry far more than rain alone. Joints in those spots wear faster and stay damp longer.
We note where roof water reaches the chimney and whether gutters and downspouts nearby are working. Clearing or redirecting them is not masonry work, but pointing it out can protect the repair. The masonry damage already caused is priced as usual, and we suggest the order that makes most sense.
Watching the repaired masonry afterwards
After the repair, watch the areas that showed damage before, especially after heavy rain. Dry joints, no new sand on the roof and no fresh stains inside are good signs that the masonry is shedding water again.
If something seems wrong, let us know which face and after what weather. Our notes from the job show the exact areas repaired, so a fresh fault can be told apart from the original one. We would rather hear about a concern early than find it grown at the next maintenance visit.
Chimney masonry work, itemized
- Repointing of cracked and open joints
- Joint finish matched to the old profile
- Plant growth removed and joints repaired
- Base courses and ground contact checked
Before you approve masonry repairs
Can you repair chimney brickwork inside the attic or the room?
Yes, where it is accessible. The masonry below the roof line and the chimney breast indoors can crack too. We note those areas during the visit and price any interior masonry repair separately.
Do you need to go on the roof for chimney masonry work?
For work above the roof line, usually yes. We plan the route and protection so the roof covering takes as little wear as possible, and we tell you if a roofer needs to lift any covering.
Can masonry repairs go ahead in wet weather?
Fresh mortar needs protection from heavy rain while it sets. We plan the work around the weather, cover open work at the end of each day and move a step when conditions call for it.
More Ways to Care for Your Fireplace
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo