
Chimney brick and joint repair in Wynwood
A workmanship warranty on the masonry repairs we complete, and a written record of what was done.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney brick damage around homes in Wynwood
- Bricks that rock or sit loose
- Plants growing from chimney joints
- Caulk smeared over cracked joints
- Stains on the attic side of the chimney
Jump to
A chimney mason's view of the damage
Chimney masonry inside the attic
Where the chimney passes through the attic, its masonry is out of sight but not out of the weather. Water that gets past the flashing or through the face often shows first as staining, damp mortar or loose sand on the attic side.
If the attic is safely accessible, we include a look there in the visit. That view helps tie outside damage to its effect inside. Masonry repairs in the attic are priced separately, and we note any framing that sits too close to the chimney while we are there.
Paint on chimney brick
Paint on exterior brick can look tidy, but it can also hide cracks and hold moisture in the masonry. When water cannot dry outward, paint may blister or peel, sometimes taking the brick face with it.
We look at where the paint is failing and what lies underneath. A patch of peeling paint over a damp area often points to a water source that needs repair. Whether to remove, renew or leave the paint is a separate choice, priced apart from the masonry work.
Checking the brickwork from the ground
You can learn a lot about chimney masonry without leaving the ground. With binoculars, look at the top courses, the corners and the joints on each face. Note missing mortar, loose or shifted bricks, broken faces and plants.
Walk around the base as well and look for cracks, damp patches and debris. Write down what you see and on which side. Stay off ladders and the roof, since loose masonry and height are a dangerous mix. Your notes help us check the same spots closely on the visit.
A small trial before the whole job
Where the look of the repair matters, a small trial area helps. We repoint a short stretch or set a sample unit so you can see the mortar color, texture and joint finish once dry.
You approve the sample before the rest goes ahead. That trial avoids repointing a whole face in a mortar that looks wrong once dry. It also gives both of us a clear standard to compare the finished work against. We list the sample as a step in the scope.
What your chimney mason prices
- Cut-out and replacement of broken units
- Crack pattern mapped before repair
- Cleanup of mortar smears on brick
- Written record of the repaired areas
Chimney crack repair questions answered
Is joint work alone enough for my chimney?
Sometimes. If only the mortar has failed, chimney tuckpointing is the focused repair. If bricks are broken as well, mixed masonry repair fits better. The visit shows which case you have.
When can I use the fireplace after chimney masonry repair?
Fresh mortar needs time to cure before it takes heat. We tell you the waiting period for the materials used and note it in the written record of the work.
Is a small crack in the chimney mortar urgent?
Usually not urgent, but worth looking at. Small cracks let in water over time, and water drives most masonry decay. We explain whether it can wait and what it might lead to if left.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
