Rebuilding the chimney above the roofline in Bay Point
Debris hauled away, the house protected and a written record of the rebuilt section at the end.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a partial rebuild may be needed
- Repairs that keep failing
- Top courses shifted out of line
- Bricks crumbling to sand
- Soft mortar you can scrape out by hand
Jump to
Our approach to chimney reconstruction
A bond break around the flue
Where the flue lining rises through the crown, the two should not be locked together. The Florida Building Code calls for a bond break there, so the lining can expand with heat without cracking the crown.
A crown cast tight against the lining can crack as the chimney heats and cools, and the cracks let water into the new masonry. We form the bond break as the crown is built and seal it as the code requires. It is a small detail that protects the whole rebuild.
Curing the new masonry and crown
New mortar and concrete gain strength as they cure. Hot sun and wind can dry them too fast, and heavy rain can wash out fresh joints or mark a new crown.
We protect fresh work while it cures and follow the product instructions for the crown and mortar. The fireplace stays out of use until the curing period has passed. We tell you when it can be lit and note that in the written record of the work. If the weather during the job slowed curing, the waiting time may be longer, and we explain why.
When the flue is the main problem
Where the masonry is sound but the flue lining is cracked or missing, the lining can often be dealt with without a rebuild. Chimney liner installation covers fitting a listed liner inside the existing chimney.
If a rebuild is going ahead anyway, it is a good time to decide on the lining for the whole flue. We explain how the two jobs fit together and price the lining as its own line in either case. A rebuild does not settle the lining question by itself, so the two stay separate lines even when they share a visit.
A chimney separating from the house
A gap between chimney and house that widens toward the top suggests the stack is moving away from the building. Failed ties, a settling base or a loose upper section can all cause it.
We look at the attachment, the base and the crack pattern before suggesting a rebuild. If the cause is in the footing or the structure, an engineer's assessment may need to come first. A rebuild then restores the upper stack and ties it back to the house properly.
Line items in a chimney reconstruction
- Tooled joints that shed water
- Scaffold or roof staging
- Structural assessment flagged where needed
- Sample panel for brick and mortar
Rebuilding questions from homes in Bay Point
Who handles the roof and flashing during a rebuild?
We set new counterflashing into the courses as they go up. The base flashing and roof covering around the chimney are coordinated with your roofer where needed, and the estimate says who does which part.
How is the house protected while the chimney is open?
We seal the fireplace opening, protect the roof and the ground below and cover the open chimney at the end of each work day. That keeps rain and debris out of the flue and the house.
Do you rebuild factory-built metal chimneys in brick?
No. A factory-built chimney is a listed system and is repaired with the parts its maker specifies. Rebuilding applies to masonry chimneys, and we tell you which kind you have on the visit.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo