Rebuilding the chimney above the roofline in Biscayne Park
Debris hauled away, the house protected and a written record of the rebuilt section at the end.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a partial rebuild may be needed
- A gap widening between chimney and wall
- Top courses shifted out of line
- Daylight through the masonry in the attic
- A top section that sways in the wind
Jump to
Planning a rebuild above the roofline
Fitting the rain cap on the new top
A rain cap over the flue keeps rain and debris out. The Florida Building Code sets a minimum open area under a rain cap in relation to the flue it serves, so the cap does not choke the draft.
When the rebuild is complete, we fit a cap sized to the flue, or refit the existing one if it is sound and suitable. The brick industry's guidance notes that metal caps should resist corrosion and that the maker's data on draft should be checked. The estimate names the cap and its metal.
Ordering materials for a rebuild
A rebuild needs matched brick, flue tiles or a listed liner, a crown or its materials and flashing metal. Some of these may need ordering, and matched brick in particular can take time to find.
We tell you which items are ordered and plan temporary protection for the chimney if it needs it in the meantime. The start date is set once the materials are in hand, so the chimney is not opened and then left waiting. If a material cannot be found, we explain the alternatives before anything is ordered.
How a rebuild estimate is laid out
A rebuild estimate should read like a project plan. Each stage has its own line: access and protection, removal to the agreed line, new courses, the flue lining, flashing, crown, cap and cleanup.
Separate lines let you compare quotes and see where the money goes. They also show what is not included, such as roofing work by another trade. Ask about any line that is unclear, and we will explain what it covers and why it is there. A single rebuild figure with no breakdown makes that comparison impossible.
Same-day make-safe work, when the schedule allows
When a chimney top is loose or has partly fallen, a quick visit to make it safe matters most. Same-day visits are available when the schedule has room for one. On that visit, masonry at risk of falling is taken down and the opening is protected.
The rebuild itself follows once the scope is agreed and materials are ready. Both the make-safe visit and the rebuild are priced separately, and each waits for your approval. Sound bricks taken off during the make-safe step are kept for reuse.
Reconstruction items after the free inspection
- Removal boundary marked and agreed
- Top height checked against the code
- Clearance to framing at roof and attic
- Structural assessment flagged where needed
Questions people raise about a rebuild in Biscayne Park
How is the house protected while the chimney is open?
We seal the fireplace opening, protect the roof and the ground below and cover the open chimney at the end of each work day. That keeps rain and debris out of the flue and the house.
What paperwork do I get after the rebuild?
A written record of the work that shows where the rebuild started, what was used for the lining, crown and flashing. Keep it with your house papers.
Will a rebuild change how my fireplace draws?
It should not make it worse. The rebuilt flue is kept to a size that suits the fireplace, and the top follows the code's height rule. If draft was a problem before, we explain what the rebuild can and cannot change.
More Ways to Care for Your Fireplace
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo