Chimney rebuilds and flue decisions in Boulevard Gardens
Same-day visits are available when the schedule allows, to make loose masonry safe ahead of a rebuild.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Damage that points toward a rebuild
- A stack that has tipped out of plumb
- Repairs that keep failing
- Water pouring in around the chimney
- A top section that sways in the wind
Jump to
How a chimney rebuild comes together
Where new lining meets the old
In a partial rebuild, the new flue lining must meet the lining that stays below. Code rules for clay linings expect them to run from the top of the smoke chamber, or from below the lowest inlet, to a point above the chimney's enclosing walls.
Where old and new tiles meet, the joint has to be sound and smooth on the inside. If the retained lining is damaged, a rebuild does not fix it by itself. We check the lining below the rebuild line where we can and tell you whether it needs its own repair.
Tooling the new joints to shed rain
The finish on a mortar joint affects how well the wall sheds water. The brick industry's guidance names concave, V-shaped and grapevine joints as the most resistant to water on exterior brickwork.
We tool the rebuilt joints at the right stage, when the mortar is firm to the thumb, so the surface is dense. Where the retained masonry has a different joint profile, we discuss whether to match it or use a more weather-resistant shape. The chosen profile is named on the estimate.
All debris hauled away
A rebuild creates a large amount of debris: old brick, broken mortar, crown pieces, old flashing and packaging. We clean up as the work goes and haul it all away when the job is done.
Brick chips in gutters, dust on sills and mortar on paving are cleaned before we leave. Tell us about areas that need extra care, such as planted beds or a pool deck, so protection is planned before removal begins. Nothing from the old chimney is left in your bins or on the curb for you to deal with.
Rebuilding a chimney you do not use
If the fireplace sits idle, you might wonder whether a failing chimney is worth rebuilding. An unused chimney still stands above the roof, still carries its own weight and still lets water in where its masonry has failed.
We explain what the chimney needs to be safe and watertight, even if it will not be used. The flue lining decisions may be simpler in that case, and we discuss what can be left out. The estimate shows the difference. A rebuilt top also keeps rain out of the house whether or not the fireplace is lit.
Reconstruction items after the free inspection
- Lining decision for the connected appliance
- New crown with drip edge and bond break
- Clearance to framing at roof and attic
- Appliance vent disconnection coordinated
Questions people raise about a rebuild in Boulevard Gardens
Can you reuse the original bricks?
Where they are sound, yes. We clean the old mortar off and check each unit for cracks and broken faces. Damaged bricks are replaced with new or salvaged units chosen to match the courses that stay.
What happens to a furnace vent in the chimney during a rebuild?
If a furnace or water heater vents into the chimney, it has to be shut down or disconnected while the flue is open. We plan that step with a heating or plumbing contractor and include it in the schedule.
What should I have ready before the rebuild visit in Boulevard Gardens?
A way into the room with the fireplace, a route to the part of the yard under the chimney and, if possible, attic access. Records of earlier repairs and any roof plans help us set the boundary and the order of work.
More Ways to Care for Your Fireplace
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo