Rebuilding the chimney above the roofline in Central Beach
Our family team plans the rebuild with your roofer, so the flashing and covering close properly.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs a partial rebuild may be needed
- Top courses shifted out of line
- Cracks running through several bricks
- Brick falling onto the roof
- Bricks crumbling to sand
Jump to
Rebuilding the stack with the flue in mind
Base flashing and the roof covering
The lower layer of flashing lies on the roof and turns up against the chimney. It sits under or woven into the roof covering, so replacing it often means lifting some of that covering.
Depending on the roof and the job, we fit the base flashing ourselves or coordinate it with your roofer. The estimate says who handles which part. When the rebuild is finished, both layers of flashing should lap correctly, with no gap left between the two trades.
Fireblocking at floors and ceilings
At each floor and ceiling a chimney passes, the code requires the gap between chimney and framing to be closed with noncombustible material fastened in place. That fireblocking keeps fire and hot gases from traveling through the gap.
When a rebuild goes below the roof line, we check the fireblocking at each level we reach. Missing or combustible material is replaced as part of the work or noted for the right trade. The estimate lists the levels where fireblocking is checked or installed.
Full joints in every new course
Brick walls resist water best when every mortar joint is filled solid. The brick industry's guidance on water penetration treats full bed and head joints as essential, since gaps inside a joint give water a path.
In a rebuild, each brick is laid on a full bed of mortar with its ends buttered. Deep furrows in the mortar bed are avoided. That care is invisible once the wall is finished, so we describe the method on the estimate rather than leaving it to trust.
Smoke problems and what a rebuild can change
If the fireplace smoked into the room before the rebuild, the rebuild may help, or it may not. A top below the code's height rule or a flue narrowed by damage can be corrected as part of the rebuild.
Other causes, such as a room that is too airtight or a fireplace opening too large for the flue, lie outside the rebuild. We explain what we think caused the problem and what the rebuild can realistically change before you approve it.
How a chimney rebuild is itemized in Central Beach
- Rain cap fitted to the flue
- Cover over the open chimney each evening
- Appliance vent disconnection coordinated
- Mortar smears cleaned from finished brick
Rebuilding questions from homes in Central Beach
What happens to the flue lining during a rebuild?
The lining is rebuilt with the masonry, either as new clay flue tiles set as the courses rise or as a listed liner. The choice depends on the appliance connected, and it is priced as its own line.
What if you find more damage below the planned line?
We stop and show you what removal uncovered before going further. You hear what it means and what it would add, and the boundary moves only with your agreement.
What happens if it rains during the rebuild?
Open work stays covered, and fresh mortar is protected from heavy rain. Steps that need dry weather move to a suitable day, and the scope and price stay the same.
More Ways to Care for Your Fireplace
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo