Chimney rebuild work from removal to crown in Coconut Creek
A free inspection first, then a written estimate that shows where removal stops and why.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that the stack needs reconstruction
- A gap widening between chimney and wall
- Mortar washed out deep in the joints
- Repairs that keep failing
- Daylight through the masonry in the attic
Jump to
Chimney rebuild work at homes in Coconut Creek
A stack that has moved
Some chimneys tip, twist or pull away from the house. The movement may come from the footing, from a failed attachment to the house or from the top section breaking loose from the masonry below.
A rebuild that simply relays the top on a moving base would not last. We look at where the movement starts and whether it continues below the roof. If the cause lies in the structure, we explain what should be assessed first. The rebuild is then planned around what that assessment finds.
The code's height rule for the top
A chimney top has to clear the roof where it passes through, and it has to clear any part of the building close by. Florida's building code sets both margins. Those margins are set for fire safety rather than for draft.
When a chimney is rebuilt, the new top has to meet that rule. We check the old height against it before work starts. If the old top fell short, we explain what the rebuild must change and how the chimney will look afterwards. That way there are no surprises when the new courses go up.
A sample panel before the rebuild
Before the full rebuild, a small sample of brick and mortar laid together helps you judge the result. You see the color, the joint width and the finish once the mortar has dried.
Mortar looks darker when wet, so we let the sample dry before you decide. Once approved, the sample becomes the standard the rebuild is checked against. It avoids discovering a mismatch after several courses are already laid. If the first sample is not right, a second one with a different sand or brick costs little compared with relaying finished work.
Keeping clear of a failing stack
A chimney with loose courses or a shifted top can shed masonry without warning, especially in wind. Keep children, pets and visitors away from the ground below it, and avoid parking there.
Do not try to pull loose bricks off or brace the stack yourself. Tell us where pieces have landed and how large they were when you call. That information shapes how quickly the visit is arranged and how the area is protected. A top that sways or has visibly slipped counts as urgent, so say so at the start of the call.
Line items in a chimney reconstruction
- Clay flue tiles set as courses rise
- Clearance to framing at roof and attic
- Shoulders laid to shed water
- Written record of the rebuilt section
Your chimney rebuild questions
Will the rebuilt chimney need to be taller than before?
Only if the old top fell short of the Florida Building Code's height rule for chimneys. We check it against the roof and nearby parts of the house and explain any change before you approve.
What happens if it rains during the rebuild?
Open work stays covered, and fresh mortar is protected from heavy rain. Steps that need dry weather move to a suitable day, and the scope and price stay the same.
What should I have ready before the rebuild visit in Coconut Creek?
A way into the room with the fireplace, a route to the part of the yard under the chimney and, if possible, attic access. Records of earlier repairs and any roof plans help us set the boundary and the order of work.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo