Chimney rebuilding for homes in Cooper City
We take the damaged section down to sound masonry and rebuild it with a new top and flashing tie-in.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a rebuild enters the conversation
- A stack that has tipped out of plumb
- Flue tiles showing through open joints
- Masonry too loose to hold new flashing
- Bricks crumbling to sand
Jump to
Chimney rebuilding in Cooper City, step by step
Rebuilding the sloped shoulders
Where a chimney narrows above the fireplace, the step or slope is called the shoulder. When a rebuild reaches that level, the shoulder surface is relaid so it sheds water rather than holding it.
On a rebuild, we lay the shoulder with solid brick or finish it with a wash placed into each step, as brick industry guidance suggests. Open brick cores, or a wash that skims across the steps, would hold water. We describe how the rebuilt shoulders will be finished and include them on the estimate.
Setting clay flue tiles as the courses rise
When clay flue tiles line the rebuilt section, they go in as the brickwork rises. The brick industry's chimney guidance describes setting the tiles a section ahead of the brick, bedding them in mortar and smoothing the joints on the inside.
Smooth inside joints help the flue draw cleanly and make cleaning easier. The tiles are checked for cracks before they go in, since a cracked tile hidden inside new brick is hard to reach later. We describe how the tiles will be set on the estimate.
Same-day make-safe work, when the schedule allows
When a chimney top is loose or has partly fallen, a quick visit to make it safe matters most. Same-day visits are available when the schedule has room for one. On that visit, masonry at risk of falling is taken down and the opening is protected.
The rebuild itself follows once the scope is agreed and materials are ready. Both the make-safe visit and the rebuild are priced separately, and each waits for your approval. Sound bricks taken off during the make-safe step are kept for reuse.
When the flue is the main problem
Where the masonry is sound but the flue lining is cracked or missing, the lining can often be dealt with without a rebuild. Chimney liner installation covers fitting a listed liner inside the existing chimney.
If a rebuild is going ahead anyway, it is a good time to decide on the lining for the whole flue. We explain how the two jobs fit together and price the lining as its own line in either case. A rebuild does not settle the lining question by itself, so the two stay separate lines even when they share a visit.
Line items in a chimney reconstruction
- Removal boundary marked and agreed
- Base flashing coordinated with the roofer
- Appliance vent disconnection coordinated
- Sample panel for brick and mortar
Rebuilding questions from homes in Cooper City
What happens to the flue lining during a rebuild?
The lining is rebuilt with the masonry, either as new clay flue tiles set as the courses rise or as a listed liner. The choice depends on the appliance connected, and it is priced as its own line.
Does the rebuild include a new crown and cap?
A rebuilt top normally gets a new crown, sloped with a drip edge and a bond break around the flue lining. A rain cap is fitted or refitted to suit the flue, and both appear on the estimate.
Who handles the roof and flashing during a rebuild?
We set new counterflashing into the courses as they go up. The base flashing and roof covering around the chimney are coordinated with your roofer where needed, and the estimate says who does which part.
More Ways to Care for Your Fireplace
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo