Skip to content
(645) 465-4171

Chimney rebuild work from removal to crown in Deerfield Beach

Tell us what fell, what moved or what keeps failing, and we explain whether rebuilding fits.

  • Owned and run locally
  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run

Clues that the stack needs reconstruction

  • A gap widening between chimney and wall
  • Repairs that keep failing
  • Cracks running through several bricks
  • A bulge in the chimney face
Jump to

A rebuild contractor that sets the boundary first

Setting the line where removal stops

The removal line is where new work will meet old. It should sit in masonry that is sound: firm mortar, tight units and no cracks running down past it. Set too high, it leaves weak masonry under the new work. Set too low, it adds cost without need.

We set a planned line on the estimate, based on what we can test before removal. We then confirm it as the courses come down. You see where it sits and why, in words you can check against the chimney itself.

New brick for the courses that stay

In a partial rebuild, the new brick sits directly above the old, so the match matters. Size is as important as color, since a brick that is taller or longer shows in every joint line.

We look for new brick close to yours and bring samples to compare against the retained courses. Where no close match exists, we explain the options, including reusing sound original bricks on the most visible faces. The estimate names the brick chosen and where it will go.

Curing the new masonry and crown

New mortar and concrete gain strength as they cure. Hot sun and wind can dry them too fast, and heavy rain can wash out fresh joints or mark a new crown.

We protect fresh work while it cures and follow the product instructions for the crown and mortar. The fireplace stays out of use until the curing period has passed. We tell you when it can be lit and note that in the written record of the work. If the weather during the job slowed curing, the waiting time may be longer, and we explain why.

Keeping debris out of the flue

When the top of a chimney comes off, mortar and brick fragments can fall into the flue and land on the damper or in the firebox. That debris can block the flue or damage the lining below.

We cover the flue opening during removal and clear anything that does fall in. The fireplace opening is sealed from the room side, so dust and debris stay out of the house. Before the rebuild is finished, the flue is checked to make sure it is clear.

Reconstruction items after the free inspection

  • Sound original brick cleaned for reuse
  • New crown with drip edge and bond break
  • Roof covering protection
  • Debris removal and haul-away

What people ask before a rebuild

What happens to the flue lining during a rebuild?

The lining is rebuilt with the masonry, either as new clay flue tiles set as the courses rise or as a listed liner. The choice depends on the appliance connected, and it is priced as its own line.

Can a chimney that has moved away from the house be rebuilt?

Often, but the reason it moved has to be understood first. We look at the base, the attachment and the crack pattern, and we explain what should be assessed before a rebuild is priced.

Can the rebuild be split into stages?

Partly. Loose masonry can be made safe first and the rebuild scheduled later. Once removal starts, though, the section is usually rebuilt in one sequence, so the chimney is not left open.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Send your details for a free Miami chimney or fireplace inspection. We will call to confirm the appointment.

Chimney & Fireplace Brands We Work With