Skip to content
(645) 465-4171

A chimney rebuild contractor for Edgewater

Upfront pricing for each rebuild step, from staging and removal to crown, cap and cleanup.

  • Owned and run locally
  • Available for same-day service
  • Fully licensed and insured
  • Family owned and run
Call Now (645) 465-4171 Book Online

What a chimney due for rebuilding shows

  • Repairs that keep failing
  • Broken brick spread over large areas
  • A bulge in the chimney face
  • Soft mortar you can scrape out by hand
Jump to

From removal to new crown, a full rebuild

The evidence behind a rebuild recommendation

A rebuild recommendation should rest on things you can check. We look at how deep the mortar has failed, how many units are loose or broken, where cracks run and whether the stack has moved.

We also look at what has been done before. A chimney that has been repointed or patched several times with the damage returning tells its own story. The estimate lists the evidence plainly, so you can weigh it yourself or show it to someone else before deciding.

Checking flue tiles before they go in

A clay flue tile hidden inside new masonry cannot easily be inspected or replaced. The brick industry's guidance calls for inspecting flue tiles for cracks and other damage just before installation.

We check each tile as it arrives and again before it is set. A damaged tile is set aside rather than built in, and a replacement is ordered. It is a small step, but it protects the whole rebuild, since a cracked lining can let heat and exhaust reach the masonry and the house.

When two metals touch

Two different metals in contact, in the presence of water, can corrode faster than either would alone. On a chimney, that can happen where new flashing meets an old cap, where a fastener differs from the sheet it holds or where copper meets galvanized steel.

We look at which metals will stay on the chimney and which are new, and choose parts that are compatible. Where two metals must meet, we separate them. The estimate lists the metal for each part, so the choice can be checked.

Access equipment for a rebuild

Rebuilding means working at height for several days with heavy material. Depending on the chimney's height and the roof, that calls for roof staging or scaffolding set against the house.

Access is listed as its own item on the estimate, since it can be a meaningful part of the cost. We plan where equipment stands and how it is protected, and tell you which doors, paths or parking areas will be affected while it is up. Staging stays in place only as long as the work needs it and comes down before the final cleanup.

Steps a full rebuild may add

  • Removal boundary marked and agreed
  • Clay flue tiles set as courses rise
  • Lining decision for the connected appliance
  • Corrosion-resistant ties where the chimney needs them

Questions about chimney rebuilding

Can you reuse the original bricks?

Where they are sound, yes. We clean the old mortar off and check each unit for cracks and broken faces. Damaged bricks are replaced with new or salvaged units chosen to match the courses that stay.

Does the rebuild include a new crown and cap?

A rebuilt top normally gets a new crown, sloped with a drip edge and a bond break around the flue lining. A rain cap is fitted or refitted to suit the flue, and both appear on the estimate.

Will the rebuilt chimney need to be taller than before?

Only if the old top fell short of the Florida Building Code's height rule for chimneys. We check it against the roof and nearby parts of the house and explain any change before you approve.

More Ways to Care for Your Fireplace

More about chimney rebuildEvery service in Edgewater

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Send your details for a free Miami chimney or fireplace inspection. We will call to confirm the appointment.

Chimney & Fireplace Brands We Work With