Partial or full-height chimney rebuilds in Lauderdale Harbours
New courses, a new crown and the flue decision, planned as one project and priced line by line.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney problems that call for rebuilding
- Loose bricks through several top courses
- Mortar washed out deep in the joints
- Cracks running through several bricks
- A bulge in the chimney face
Jump to
Where a rebuild starts and where it stops
A sample panel before the rebuild
Before the full rebuild, a small sample of brick and mortar laid together helps you judge the result. You see the color, the joint width and the finish once the mortar has dried.
Mortar looks darker when wet, so we let the sample dry before you decide. Once approved, the sample becomes the standard the rebuild is checked against. It avoids discovering a mismatch after several courses are already laid. If the first sample is not right, a second one with a different sand or brick costs little compared with relaying finished work.
Where the new masonry meets the old
The join between rebuilt courses and retained masonry is the most visible line on a partial rebuild. A clean, level transition with matching joint lines makes it read as one chimney.
We set the first new course carefully on the prepared old masonry and carry the joint lines through. Some difference in color is likely at first, since the old brick has weathered. We explain what to expect before you approve and how the contrast usually softens over time. Where the join falls at the roof line, the flashing often hides much of it anyway.
Ordering materials for a rebuild
A rebuild needs matched brick, flue tiles or a listed liner, a crown or its materials and flashing metal. Some of these may need ordering, and matched brick in particular can take time to find.
We tell you which items are ordered and plan temporary protection for the chimney if it needs it in the meantime. The start date is set once the materials are in hand, so the chimney is not opened and then left waiting. If a material cannot be found, we explain the alternatives before anything is ordered.
A shattered crown over loose courses
When the crown has broken into pieces, water reaches the top courses with every rain. The bricks under a failed crown are often loose, soaked and stained by the time the crown is noticed.
Replacing the crown alone would sit it on masonry that cannot hold it. In that case, the damaged top courses are rebuilt and a new crown is formed over them. We check how deep the damage goes before setting the removal line. The new crown then goes on over masonry that can support it for the long term.
Chimney rebuild lines you approve
- Top height checked against the code
- Fireblocking where the stack passes floors
- Scaffold or roof staging
- Fireplace opening sealed during removal
Before you approve a chimney rebuild
Can you reuse the original bricks?
Where they are sound, yes. We clean the old mortar off and check each unit for cracks and broken faces. Damaged bricks are replaced with new or salvaged units chosen to match the courses that stay.
Who handles the roof and flashing during a rebuild?
We set new counterflashing into the courses as they go up. The base flashing and roof covering around the chimney are coordinated with your roofer where needed, and the estimate says who does which part.
What stops water getting into the new top?
The new crown is sloped with a drip edge, separated from the flue lining by a bond break, and the joints are tooled to shed rain. New counterflashing is set into the courses at the roof line.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo