Taking a chimney down and rebuilding it in Morningside
Debris hauled away, the house protected and a written record of the rebuilt section at the end.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When patching gives way to rebuilding
- Mortar washed out deep in the joints
- Broken brick spread over large areas
- Daylight through the masonry in the attic
- Stepped cracks down the stack
Jump to
Our approach to chimney reconstruction
A listed liner inside the rebuilt section
Instead of clay tiles, the rebuilt section can take a listed liner, usually stainless steel, fitted to its maker's instructions. Chimney liners are tested and listed under UL 1777, and each system comes with its own parts and installation rules.
A listed liner can suit a chimney where the appliance or the retained lining below calls for it. It may run the full height of the chimney rather than just the rebuilt part. Chimney liner installation covers the options, and we explain how the liner and the rebuild fit together.
A sample panel before the rebuild
Before the full rebuild, a small sample of brick and mortar laid together helps you judge the result. You see the color, the joint width and the finish once the mortar has dried.
Mortar looks darker when wet, so we let the sample dry before you decide. Once approved, the sample becomes the standard the rebuild is checked against. It avoids discovering a mismatch after several courses are already laid. If the first sample is not right, a second one with a different sand or brick costs little compared with relaying finished work.
Pricing each stage of a rebuild up front
A rebuild has many stages, and each one carries its own price on the estimate before work begins. Access, protection, removal, new courses, the flue lining, flashing, crown, cap and cleanup are all listed.
Upfront pricing means no hidden fees appear at the end. If removal uncovers something that needs extra work, it is described and priced as a separate item for your decision. The total you pay is the approved scope plus any changes you chose. You can hold the estimate beside the final bill and match every figure.
Masonry coming down and the 24/7 line
If bricks or pieces of crown are falling from the chimney, move people and pets away from that side of the house. Keep them clear of doors and paths beneath it, and do not climb up to look.
Then use our 24/7 emergency line, which exists for chimney problems that cannot wait for a routine booking. We plan safe access and protection for the area below. The urgent work and any later rebuild are discussed and priced before they begin. Keep a note of what fell and where, since it helps us plan the safest access.
How a chimney rebuild is itemized in Morningside
- Dismantling to sound masonry
- Counterflashing set into new joints
- Scaffold or roof staging
- Structural assessment flagged where needed
Questions people raise about a rebuild in Morningside
Is a partial rebuild enough for my chimney?
Often, yes. Damage is usually worst above the roof, where the weather hits hardest. If the masonry below is sound, rebuilding only the damaged top section is the normal approach, and we explain why.
Do you rebuild factory-built metal chimneys in brick?
No. A factory-built chimney is a listed system and is repaired with the parts its maker specifies. Rebuilding applies to masonry chimneys, and we tell you which kind you have on the visit.
What should I have ready before the rebuild visit in Morningside?
A way into the room with the fireplace, a route to the part of the yard under the chimney and, if possible, attic access. Records of earlier repairs and any roof plans help us set the boundary and the order of work.
More Ways to Care for Your Fireplace
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo