
Chimney rebuilds and flue decisions in Progresso Village
Decide on the rebuild within 72 hours of the free inspection at your home and a 10% discount applies.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Damage that points toward a rebuild
- Top courses shifted out of line
- Broken brick spread over large areas
- Flue tiles showing through open joints
- Soft mortar you can scrape out by hand
Jump to
What goes into a partial chimney rebuild
The code's height rule for the top
A chimney top has to clear the roof where it passes through, and it has to clear any part of the building close by. Florida's building code sets both margins. Those margins are set for fire safety rather than for draft.
When a chimney is rebuilt, the new top has to meet that rule. We check the old height against it before work starts. If the old top fell short, we explain what the rebuild must change and how the chimney will look afterwards. That way there are no surprises when the new courses go up.
What the free inspection can settle for a rebuild
Our free inspection looks at the stack from the ground and, where it is safe, from the roof. It also covers the fireplace, the part of the flue we can see and the attic side where accessible. We test the joints and units we can reach.
Some things stay uncertain until removal begins, such as the exact depth of weak masonry. We say what the visit could confirm and what it could not. The estimate sets a planned removal line and explains how it will be confirmed on the job.
Rebuilding a chimney you do not use
If the fireplace sits idle, you might wonder whether a failing chimney is worth rebuilding. An unused chimney still stands above the roof, still carries its own weight and still lets water in where its masonry has failed.
We explain what the chimney needs to be safe and watertight, even if it will not be used. The flue lining decisions may be simpler in that case, and we discuss what can be left out. The estimate shows the difference. A rebuilt top also keeps rain out of the house whether or not the fireplace is lit.
Comparing two rebuild quotes
Rebuild quotes can differ widely, so compare them stage by stage. Check where each one starts the removal, how the flue will be lined, what kind of crown is included and who handles the flashing and roof covering.
A lower total may reflect a higher removal line, a mortar wash instead of a formed crown or cleanup left out. Ask how each company handles damage found below the planned line. We are happy to go through our estimate stage by stage with you.
Chimney rebuild lines you approve
- Counterflashing set into new joints
- Top height checked against the code
- Mortar chosen for chimney exposure
- Mortar smears cleaned from finished brick
Asked often about chimney rebuilds
Is a partial rebuild enough for my chimney?
Often, yes. Damage is usually worst above the roof, where the weather hits hardest. If the masonry below is sound, rebuilding only the damaged top section is the normal approach, and we explain why.
What paperwork do I get after the rebuild?
A written record of the work that shows where the rebuild started, what was used for the lining, crown and flashing. Keep it with your house papers.
Will a rebuild change how my fireplace draws?
It should not make it worse. The rebuilt flue is kept to a size that suits the fireplace, and the top follows the code's height rule. If draft was a problem before, we explain what the rebuild can and cannot change.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo
