Chimney rebuilding for homes in Riverland Village
Upfront pricing for each rebuild step, from staging and removal to crown, cap and cleanup.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a rebuild enters the conversation
- Loose bricks through several top courses
- Repairs that keep failing
- Daylight through the masonry in the attic
- Bricks crumbling to sand
Jump to
A rebuild contractor that sets the boundary first
Why a rebuilt stack keeps to its line
A masonry chimney may only step out from a wall so far, and its flue may only shift sideways so far as it rises. Florida's building code sets both limits. Those limits protect the stack's balance and the flue's path.
A rebuild follows the chimney's existing line unless there is a good reason to change it. We do not add projecting shapes or shift the stack in ways the code does not allow. If the old chimney had features that fall outside those rules, we explain how the rebuild would handle them.
New brick for the courses that stay
In a partial rebuild, the new brick sits directly above the old, so the match matters. Size is as important as color, since a brick that is taller or longer shows in every joint line.
We look for new brick close to yours and bring samples to compare against the retained courses. Where no close match exists, we explain the options, including reusing sound original bricks on the most visible faces. The estimate names the brick chosen and where it will go.
Full joints in every new course
Brick walls resist water best when every mortar joint is filled solid. The brick industry's guidance on water penetration treats full bed and head joints as essential, since gaps inside a joint give water a path.
In a rebuild, each brick is laid on a full bed of mortar with its ends buttered. Deep furrows in the mortar bed are avoided. That care is invisible once the wall is finished, so we describe the method on the estimate rather than leaving it to trust.
The fireplace during the rebuild
From the moment removal starts until the new masonry and crown have cured, the fireplace must not be used. Heat would dry fresh mortar too fast, and the flue may be open or blocked with protection.
We tell you when it is safe to use the fireplace again, based on the materials and the weather. If the flue needs cleaning or another check before use, we say so. The written record of the work notes the waiting time and any conditions.
Chimney rebuild lines you approve
- Clay flue tiles set as courses rise
- Lining decision for the connected appliance
- Clearance to framing at roof and attic
- Fireblocking where the stack passes floors
Your chimney rebuild questions
Will the rebuilt section match the rest of the chimney?
We aim for a close match in brick, mortar color and joint finish, and show you samples before work starts. New work often looks brighter at first and blends in as it weathers.
What happens if it rains during the rebuild?
Open work stays covered, and fresh mortar is protected from heavy rain. Steps that need dry weather move to a suitable day, and the scope and price stay the same.
Can the rebuild be split into stages?
Partly. Loose masonry can be made safe first and the rebuild scheduled later. Once removal starts, though, the section is usually rebuilt in one sequence, so the chimney is not left open.
More Ways to Care for Your Fireplace
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo