
Chimney rebuilding for homes in Riverside Park
Where the stack has moved, we explain what should be assessed before a rebuild is priced.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a rebuild enters the conversation
- Mortar washed out deep in the joints
- Brick falling onto the roof
- Masonry too loose to hold new flashing
- Soft mortar you can scrape out by hand
Jump to
A rebuild contractor that sets the boundary first
A bond break around the flue
Where the flue lining rises through the crown, the two should not be locked together. The Florida Building Code calls for a bond break there, so the lining can expand with heat without cracking the crown.
A crown cast tight against the lining can crack as the chimney heats and cools, and the cracks let water into the new masonry. We form the bond break as the crown is built and seal it as the code requires. It is a small detail that protects the whole rebuild.
Fireblocking at floors and ceilings
At each floor and ceiling a chimney passes, the code requires the gap between chimney and framing to be closed with noncombustible material fastened in place. That fireblocking keeps fire and hot gases from traveling through the gap.
When a rebuild goes below the roof line, we check the fireblocking at each level we reach. Missing or combustible material is replaced as part of the work or noted for the right trade. The estimate lists the levels where fireblocking is checked or installed.
Rebuild work inside the attic
When a rebuild goes below the roof line, part of the work happens inside the attic. That means access through a hatch or opening, dust control and protection for insulation and anything stored nearby.
Tell us where the attic access is and what is stored around the chimney. We plan the route for materials and debris and protect the rooms below. The attic side of the rebuild is listed on the estimate, so the effort is visible rather than hidden in the masonry line.
Same-day make-safe work, when the schedule allows
When a chimney top is loose or has partly fallen, a quick visit to make it safe matters most. Same-day visits are available when the schedule has room for one. On that visit, masonry at risk of falling is taken down and the opening is protected.
The rebuild itself follows once the scope is agreed and materials are ready. Both the make-safe visit and the rebuild are priced separately, and each waits for your approval. Sound bricks taken off during the make-safe step are kept for reuse.
Reconstruction items after the free inspection
- Rain cap fitted to the flue
- Tooled joints that shed water
- Roof covering protection
- Fireplace opening sealed during removal
What people ask before a rebuild
How is the house protected while the chimney is open?
We seal the fireplace opening, protect the roof and the ground below and cover the open chimney at the end of each work day. That keeps rain and debris out of the flue and the house.
Will a rebuild change how my fireplace draws?
It should not make it worse. The rebuilt flue is kept to a size that suits the fireplace, and the top follows the code's height rule. If draft was a problem before, we explain what the rebuild can and cannot change.
How do you keep debris off the roof and the yard?
Masonry is taken down by hand and lowered in a controlled way. We protect the roof covering and the ground below, clean up as we go and haul all of the debris away at the end.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting Copperfield Chimney Supply 
Rutland Heatilator Heat & Glo