Partial or full-height chimney rebuilds in Victoria Park
We match new brick to the courses that stay and show samples before the work begins.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney problems that call for rebuilding
- Repairs that keep failing
- Cracks running through several bricks
- Soft mortar you can scrape out by hand
- A top section that sways in the wind
Jump to
Where a rebuild starts and where it stops
Metal parts that resist corrosion
A rebuild brings together several metal parts: ties, flashing, the cap and its fasteners. The brick industry's guidance calls for corrosion-resistant metals in flashing and caps, since replacing them later means disturbing the new masonry.
We choose metals for each part and name them on the estimate. Metals that will touch each other are chosen to sit well together, or separated. That keeps a sound rebuild from being let down by a rusting part years later. Where you have a preference, such as copper for appearance, tell us and we explain how it would work with the other metals.
Curing the new masonry and crown
New mortar and concrete gain strength as they cure. Hot sun and wind can dry them too fast, and heavy rain can wash out fresh joints or mark a new crown.
We protect fresh work while it cures and follow the product instructions for the crown and mortar. The fireplace stays out of use until the curing period has passed. We tell you when it can be lit and note that in the written record of the work. If the weather during the job slowed curing, the waiting time may be longer, and we explain why.
When masonry repair will do
Not every damaged chimney needs rebuilding. Where the damage is limited to certain joints or units, and the stack has not moved, chimney masonry repair can fix it in place.
We explain which case you have. If the evidence points to a local repair, we price that instead of a rebuild. If you would like both options priced, we can set them side by side with the reasons for each, so you can compare scope and expected life. Choosing the smaller repair now does not rule out a rebuild later if the chimney needs it.
Rebuilding a chimney you do not use
If the fireplace sits idle, you might wonder whether a failing chimney is worth rebuilding. An unused chimney still stands above the roof, still carries its own weight and still lets water in where its masonry has failed.
We explain what the chimney needs to be safe and watertight, even if it will not be used. The flue lining decisions may be simpler in that case, and we discuss what can be left out. The estimate shows the difference. A rebuilt top also keeps rain out of the house whether or not the fireplace is lit.
Chimney rebuild lines you approve
- Sound original brick cleaned for reuse
- Scaffold or roof staging
- Cover over the open chimney each evening
- Fireplace opening sealed during removal
Questions about chimney rebuilding
Is a partial rebuild enough for my chimney?
Often, yes. Damage is usually worst above the roof, where the weather hits hardest. If the masonry below is sound, rebuilding only the damaged top section is the normal approach, and we explain why.
Can I use the fireplace while the rebuild is under way?
No. The fireplace stays out of use during the rebuild and while the new masonry cures. We tell you when it can be lit again, based on the materials used and the weather.
Do you need to go into the attic for a rebuild?
Sometimes. If removal goes below the roof line, the attic side shows the masonry, the framing clearances and the fireblocking. We tell you in advance if attic access is part of the plan.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo