Partial or full-height chimney rebuilds in Weston
We take the damaged section down to sound masonry and rebuild it with a new top and flashing tie-in.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Chimney problems that call for rebuilding
- A stack that has tipped out of plumb
- Cracks running through several bricks
- Brick falling onto the roof
- Stepped cracks down the stack
Jump to
From removal to new crown, a full rebuild
What lies under a full-height rebuild
A masonry chimney stands on its own footing, and the Florida Building Code sets out how that footing is built. For a partial rebuild above the roof, the footing is rarely part of the question.
For a full rebuild, or where the whole stack has moved, the footing matters. It sits below ground and cannot be seen on a normal visit. We explain what the visible signs suggest about it and whether an engineer should assess it before the rebuild is planned. Building new masonry on a base that is still moving would not last.
Choosing how the new flue is lined
Every masonry chimney must be lined, and the Florida Building Code ties the lining material to the appliance it serves. A rebuild is the natural time to decide how the new section is lined.
The usual choices are clay flue tiles set as the brick goes up or a listed liner fitted inside the new masonry. The right choice depends on what burns in the fireplace, what else vents into the chimney and the state of the lining below. We explain the options and price the lining as its own line.
What the free inspection can settle for a rebuild
Our free inspection looks at the stack from the ground and, where it is safe, from the roof. It also covers the fireplace, the part of the flue we can see and the attic side where accessible. We test the joints and units we can reach.
Some things stay uncertain until removal begins, such as the exact depth of weak masonry. We say what the visit could confirm and what it could not. The estimate sets a planned removal line and explains how it will be confirmed on the job.
When masonry repair will do
Not every damaged chimney needs rebuilding. Where the damage is limited to certain joints or units, and the stack has not moved, chimney masonry repair can fix it in place.
We explain which case you have. If the evidence points to a local repair, we price that instead of a rebuild. If you would like both options priced, we can set them side by side with the reasons for each, so you can compare scope and expected life. Choosing the smaller repair now does not rule out a rebuild later if the chimney needs it.
Chimney rebuild lines you approve
- Tooled joints that shed water
- Cover over the open chimney each evening
- Debris removal and haul-away
- Sample panel for brick and mortar
Partial and full rebuild questions
How is the house protected while the chimney is open?
We seal the fireplace opening, protect the roof and the ground below and cover the open chimney at the end of each work day. That keeps rain and debris out of the flue and the house.
When can the fireplace be used after the rebuild?
Once the new mortar and crown have cured. The waiting time depends on the materials and the manufacturer's instructions, and we give you the timing in the written record of the work.
What happens to a furnace vent in the chimney during a rebuild?
If a furnace or water heater vents into the chimney, it has to be shut down or disconnected while the flue is open. We plan that step with a heating or plumbing contractor and include it in the schedule.
More Ways to Care for Your Fireplace
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Gas Fireplace VentingAssess and repair the gas fireplace vent arrangement using components suited to the identified system.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Chimney Leak RepairFind the chimney water entry point and plan a repair before restoring the damaged finish.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo