Clean flues and clear findings for Brickell Key chimneys
Clear the flue of soot and debris and learn whether anything else needs attention before the next fire.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What prompts a chimney cleaning call
- Flakes of black residue in the firebox
- Smell that worsens after rain
- Scratching or rustling inside the chimney
- Heavy staining at the chimney top
Jump to
Sweeping the flue and the parts around it
Cleaning the damper and checking that it closes
The damper plate and its frame gather soot that can stop the plate from seating. During the sweep we brush both and work the handle through its range. A damper that opens fully helps the fire draw, and one that closes fully limits the air and odor moving through the flue.
Cleaning cannot straighten a warped plate or free a rusted hinge. If the damper still binds after cleaning, we tell you and describe the repair as its own item. Leave the damper where it sits in the meantime rather than forcing it.
What the cleaning covers inside the firebox
The firebox is the part of the fireplace where the fire burns. Its walls and floor are brushed and the ash is removed after the flue work, because deposits from above land there. Grates and andirons are lifted out, cleared of loose ash and returned.
Cleaning leaves the firebrick visible, which makes cracks and open joints easier to spot. Those are noted, not repaired, during a sweep. If the damage needs attention before the next fire, you receive an explanation and a separate estimate for the firebox work.
Cleaning the flue after work on the house
Roofing, painting or interior work near a fireplace can leave debris in or around the flue. Dust can settle on the smoke shelf, and a tarp left over the top can close the flue. CPSC guidance warns that chimneys and vents should not be blocked by tarps or debris during renovation work.
Tell us what work has been done and when it finished. We check the top and the passage for anything left behind before the fireplace goes back into use. Any damage from the other work is noted for you rather than folded into the cleaning.
Cleaning two fireplaces on one chimney
Where two fireplaces share one chimney, find out whether each has its own flue. We confirm the layout before quoting, because cleaning one passage does not clean the other. The estimate lists each fireplace so the price covers what you expect.
Tell us whether both are used. An unused fireplace may still need its flue looked at if its damper is left open or its top is uncapped. We clean the flues you choose and note the condition of any we did not, so nothing is assumed to be clean.
Items in a chimney cleaning visit
- Debris hauled away at the end
- Unreached sections noted in writing
- Cap and damper repairs quoted separately
- Top-mounted damper gasket cleaned
Questions about soot, flues and sweeping
Will soot end up on my furniture or floors?
It should not. The hearth and route are covered, the opening is sealed while the flue is brushed, and debris is bagged in the firebox. If you notice soot where it should not be afterward, tell us and we come back to deal with it.
Can a sweep fix a fireplace that keeps smoking?
Only if the cause is a restriction the cleaning removes, such as heavy soot at the throat or a clogged cap screen. If the flue is clear and smoke persists, we explain the other likely causes and what an assessment would look at.
How should I store firewood to keep the flue cleaner?
EPA guidance suggests keeping wood outdoors with the top covered and the sides open, so it dries. Dry, split wood burns hotter and leaves less residue in the flue than damp wood does.
More Ways to Care for Your Fireplace
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo