Chimney cleaning for fireplaces in Home Beautiful Park
Start with a free inspection, approve the cleaning you want, then see what came down before we leave.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Hints that soot has built up inside
- Soot specks on the hearth between fires
- No record of the last cleaning
- Leaves or twigs falling into the firebox
- A cap screen furred with soot
Jump to
Chimney sweeping decisions explained
Using a cleanout opening at the flue base
Some masonry chimneys include a small cleanout door near the base of a flue. The Florida Building Code's chimney chapter calls for one at the base of each masonry flue. The exception is a fireplace flue that can be cleaned through the fireplace opening. If your chimney has one, it gives access to debris that settles at the bottom of that flue.
Tell us if you know of a small metal access door on the chimney, inside or outside the house. We open it, remove what has collected and close it firmly so it seals. A door that is rusted shut or missing its latch is recorded as a separate repair.
Loose soot and hardened deposits are separate jobs
Most deposits in a used flue are dry soot or flaky residue that a brush can lift. Some deposits harden into a glossy coating that a brush slides over. The difference matters, because the two need different methods and carry different prices.
Brushing handles the loose material and is the core of a sweep. When a glazed layer remains, we show you where it is and explain the separate treatment it needs. That treatment is priced as its own item, and you decide whether to go ahead with it.
Approving the cleaning after your free inspection
The inspection that starts a sweep costs you nothing. It gives you the estimate and a chance to ask about each line before any brush goes up. Take the time you need to read it, and ask about anything that is unclear.
Where you give the go-ahead no later than 72 hours after that free inspection, the sweep carries a 10% discount. The hours run from your own inspection. It applies to the cleaning and to any other service you book inside that time.
Cleaning two fireplaces on one chimney
Where two fireplaces share one chimney, find out whether each has its own flue. We confirm the layout before quoting, because cleaning one passage does not clean the other. The estimate lists each fireplace so the price covers what you expect.
Tell us whether both are used. An unused fireplace may still need its flue looked at if its damper is left open or its top is uncapped. We clean the flues you choose and note the condition of any we did not, so nothing is assumed to be clean.
Line items in a flue cleaning estimate
- Flue brushing along the reachable length
- Damper plate and frame cleaning
- Written record of the work
- Insert liner access per the manual
Asking about chimney cleaning in Home Beautiful Park
Do you clean metal factory-built chimneys?
Yes. We identify the brand and follow its cleaning instructions. They say which brush materials suit the metal flue and how the cap comes off. Repairs to damaged sections have to use the manufacturer's listed parts.
Why do you look at the flue after it is brushed?
Soot hides the surface. Once it is off, cracks, gaps and damaged parts are easier to see. That visual check is limited to what the brushes reached, and anything it raises is explained separately.
How should I store firewood to keep the flue cleaner?
EPA guidance suggests keeping wood outdoors with the top covered and the sides open, so it dries. Dry, split wood burns hotter and leaves less residue in the flue than damp wood does.
More Ways to Care for Your Fireplace
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo