Chimney sweep work planned around your fireplace in Lake Ridge
From cap screen to firebox, the parts we clean are named on the estimate you approve.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Reasons households book a flue cleaning
- Soot specks on the hearth between fires
- Smoke drifting into the room
- A cap screen furred with soot
- Smoke puffing out as a fire starts
Jump to
What goes into cleaning your chimney
Clearing the cap screen during a sweep
A chimney cap with a mesh screen keeps sparks in and animals out, but the mesh can clog with soot. The Florida Building Code sets a minimum open area for a spark arrestor screen and expects the screen to be reachable for cleaning. A clogged screen loses that open area and can leave smoke lingering in the flue.
When the top is safe to reach, we brush the screen and clear the opening. If the mesh is torn, rusted through or loose on its fasteners, it is noted and priced as a separate cap repair. A cap that is missing altogether is noted the same way.
If you suspect a fire inside the flue
A loud roar from the chimney, sparks falling from the top or dense smoke pouring into the room can mean the deposits have caught fire. Get everyone out of the house at once. From outside, call 911 and wait for the fire department. Stay out, and do not go back in for belongings.
Once responders have finished, leave the fireplace unused. Heat from a flue fire can crack tiles and mortar in places no one can see from the room. A cleaning and a closer look at the lining should come before any further fire.
Cleaning from the roof or from the hearth
A flue can be cleaned from the roof down, from the fireplace up, or from both ends. The choice depends on safe roof access, the shape of the flue and where the debris will collect. Either way, the opening below is sealed so soot stays in the firebox.
If the roof is wet, steep or fragile underfoot, we may work from below and explain what that changes. The written record says which way the flue was cleaned. That detail matters if a section near the top needs a second look later.
What we notice at the chimney top
Working at the top gives a view of parts the cleaning does not touch. We look at the crown around the flue, the joints below it and the way the cap is fixed. Cracks, gaps or loose metal are noted while we are there.
Those notes are observations, not an evaluation of the whole chimney. They go on the written record apart from the cleaning. If something needs repair, you get a separate estimate and the choice of whether to proceed.
The chimney sweep scope for Lake Ridge homes
- Ash removal and bagged debris
- Sealed fireplace opening during brushing
- Cap screen clearing where reachable
- Refractory panels brushed gently
Sweep and cleaning questions, answered plainly
Can the free inspection and the sweep happen on one visit?
It can. We look at the fireplace and flue and give you the estimate. If you approve it and the scope allows, we clean on the same visit. If a separate item needs deciding, the cleaning can wait until you are ready.
Do you clean metal factory-built chimneys?
Yes. We identify the brand and follow its cleaning instructions. They say which brush materials suit the metal flue and how the cap comes off. Repairs to damaged sections have to use the manufacturer's listed parts.
Can you tell if the chimney had a fire inside it?
Sometimes the signs are visible, such as puffed deposits, warped metal or cracked tiles. We point them out and explain what a closer look at the lining would involve before any further use.
More Ways to Care for Your Fireplace
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo