Chimney sweep work planned around your fireplace in Miramar
Get the flue brushed, the smoke shelf cleared and the damper checked in one planned visit.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that the flue needs sweeping
- Flakes of black residue in the firebox
- A cap screen furred with soot
- Scratching or rustling inside the chimney
- Ash piled high in the firebox
Jump to
The cleaning work from cap screen to firebox
When the flue bends between hearth and top
Not every flue runs straight. Some bend to pass framing or to reach the roof at a different point, and the bend changes what a rod can reach. Flexible rods handle gentle offsets, while a sharp bend may limit how far a brush travels from one end.
Where both ends are accessible, the flue is cleaned from each side to cover the middle. If a section still cannot be reached, we say where it is and what that means for the result. You should not be told a flue is clean when part of it went unbrushed.
When rain reaches the deposits in the flue
Water entering an uncapped or damaged chimney top mixes with soot and residue. The result can be a dark stain on the firebox walls, a sour smell or a streak running down the damper. Cleaning removes the deposits but does not stop the water.
We note where the staining starts and what the top looks like. If a cap, crown or seal is letting water in, that becomes a separate finding with its own estimate. Removing the deposits often makes the source easier to see.
Looking at the hearth after the cleaning
In front of the opening sits the hearth extension, a floor of material that will not burn. It catches sparks and embers that escape the firebox. During cleaning it is covered, and afterward we look at it for cracks or gaps.
A gap along the joint between the hearth and the floor can let embers reach wood or carpet beneath. We note the condition and explain whether it affects use. Repairs to the hearth are their own item, discussed and priced before any work.
Cleaning two fireplaces on one chimney
Where two fireplaces share one chimney, find out whether each has its own flue. We confirm the layout before quoting, because cleaning one passage does not clean the other. The estimate lists each fireplace so the price covers what you expect.
Tell us whether both are used. An unused fireplace may still need its flue looked at if its damper is left open or its top is uncapped. We clean the flues you choose and note the condition of any we did not, so nothing is assumed to be clean.
The cleaning scope you approve in Miramar
- Firebox walls, floor and grate area
- Cleanout opening emptied where present
- Throat cleared of soot and flakes
- Insert liner access per the manual
Common chimney sweeping questions
What happens if you find glazed deposits in the flue?
We show you where the glaze is and explain the treatment it needs. That treatment is priced separately from the sweep. You decide whether to go ahead, and we suggest keeping the fireplace unused until the decision is made.
Why do you look at the flue after it is brushed?
Soot hides the surface. Once it is off, cracks, gaps and damaged parts are easier to see. That visual check is limited to what the brushes reached, and anything it raises is explained separately.
Can you tell if the chimney had a fire inside it?
Sometimes the signs are visible, such as puffed deposits, warped metal or cracked tiles. We point them out and explain what a closer look at the lining would involve before any further use.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo