Chimney sweeping and flue care in Poinsettia Heights
Careful brushing, contained debris and plain answers about what the deposits say about your fires.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs that point to chimney cleaning
- Leaves or twigs falling into the firebox
- Pieces of tile or mortar below the flue
- A fireplace idle for a long time
- Smoke puffing out as a fire starts
Jump to
What goes into cleaning your chimney
When the flue bends between hearth and top
Not every flue runs straight. Some bend to pass framing or to reach the roof at a different point, and the bend changes what a rod can reach. Flexible rods handle gentle offsets, while a sharp bend may limit how far a brush travels from one end.
Where both ends are accessible, the flue is cleaned from each side to cover the middle. If a section still cannot be reached, we say where it is and what that means for the result. You should not be told a flue is clean when part of it went unbrushed.
Soot stains around the fireplace opening
Dark marks above the fireplace opening can come from smoke spilling out as a fire starts or dies down. Light surface soot can often be wiped from smooth faces during the cleaning. Porous stone and brick hold soot more deeply, and cleaning them is a separate task.
Ask whether face cleaning is included before you approve the estimate, so the scope is clear. We also look at why the smoke escaped. Staining that returns after every fire can point to a draft issue rather than a cleaning one.
What we notice at the chimney top
Working at the top gives a view of parts the cleaning does not touch. We look at the crown around the flue, the joints below it and the way the cap is fixed. Cracks, gaps or loose metal are noted while we are there.
Those notes are observations, not an evaluation of the whole chimney. They go on the written record apart from the cleaning. If something needs repair, you get a separate estimate and the choice of whether to proceed.
The top plate and cap on an insert liner
When an insert vents through a liner, the old flue opening at the top is often closed with a plate around the liner. A cap sits above it. Cleaning the liner may mean lifting the cap, as the liner's instructions describe.
We refit the cap as we found it. If the plate around the liner is loose, rusted or gapped, water and animals can get into the old flue beside the liner. That is noted as a separate finding with an estimate if you want one.
Parts named in your sweep estimate
- Flue brushing along the reachable length
- Damper operation checked after cleaning
- Blockage identified before any brushing
- Unreached sections noted in writing
Chimney sweep visit questions answered
What happens if you find glazed deposits in the flue?
We show you where the glaze is and explain the treatment it needs. That treatment is priced separately from the sweep. You decide whether to go ahead, and we suggest keeping the fireplace unused until the decision is made.
Is a chimney cleaning the same as a chimney inspection?
No. A cleaning removes deposits and ends with a look at what the brushes reached. An inspection evaluates the chimney and fireplace as a system. They can be booked together, with the cleaning done ahead of the evaluation.
Can you tell if the chimney had a fire inside it?
Sometimes the signs are visible, such as puffed deposits, warped metal or cracked tiles. We point them out and explain what a closer look at the lining would involve before any further use.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo