Tuckpointing the chimney on your home in Aventura

We rake out failed mortar to sound depth and repoint with a mix that suits your brick.

Owned and run locally
Available for same-day service
Fully licensed and insured
Family owned and run

Call Now (645) 465-4171 Book Online

Signs the chimney joints need repointing

Hairline cracks running along the joints
Earlier repointing popping out in strips
Loose brick where joints have washed out
Thin mortar smeared over old joints

Jump to

Choosing mortar for a chimney repoint

Curing care for freshly repointed joints

Fresh mortar that dries too quickly can chalk, bond poorly and weather early. Federal preservation guidance describes misting new joints lightly after tooling. It also suggests covering the work to keep it damp and out of direct sun, especially where mortar is lime-rich.

We plan curing care as part of the job, not as an afterthought. That may mean return misting, covers left in place or both. We explain what we will do and what you should leave alone, such as moving covers or hosing the chimney, while the new joints cure.

Plants rooted in the chimney joints

Seedlings and vines can take root in failed mortar. Their roots can widen the joints and hold moisture against the brick. Brick industry maintenance guidance advises cutting vines away rather than pulling them, because pulling can tear brick and mortar from the wall.

We cut back growth before raking and remove what is left in the joints once it has dried. Any mortar loosened by roots is raked out with the rest. If plants keep returning, it can mean water is lingering, and we explain where that water may be coming from.

Comparing chimney tuckpointing estimates

Two repointing quotes can describe very different work. One may involve raking every failed joint to proper depth and matching the mortar. Another may be a thin skim over the old joints. The numbers only compare fairly once you know which is which.

Put the same questions to everyone who quotes. Ask how deep the joints will be raked, how head joints are cleared, which mortar is used and how the color is matched. Our proposal sets those answers down on paper, so a side-by-side comparison is straightforward.

Why raking chimney joints yourself is risky

Raking joints looks simple and is easy to get wrong. A grinder in inexperienced hands can cut brick edges and head joints, and the damage is permanent. Working on a roof or ladder adds real risk of a fall.

If you want to understand the job first, the free inspection is a safe way to do it. We explain what the joints need and how we would approach them. You can then decide how to proceed, with an accurate picture of the work and its risks.

Repointing work we price area by area

Head joints cleared by hand
Mortar chosen to suit the brick
Protection for windows, roof and plantings
Access plan for the stack above the roof

What people ask about chimney mortar

How is dust handled while old mortar is removed?

Raking makes dust and noise. We agree with you which windows stay shut, protect surfaces below and clean up as we go. Tell us about vents, patio furniture or vehicles near the chimney so we can plan protection.

Can you repoint a chimney that has stucco over the brick?

Stucco hides the joints, so there is nothing to repoint from outside. Cracked or loose stucco belongs to stucco repair. If bare brick shows above the roofline, we can assess those joints as a separate area.

What details help when I call about chimney mortar?

Tell us which side of the chimney looks worst, whether grit or mortar pieces have fallen and whether water shows inside. Mention earlier repointing or coatings. These details help us plan where to look first.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Chimney & Fireplace Brands We Work With

DuraVent
Olympia Chimney and Venting
Copperfield Chimney Supply
Rutland
Heatilator
Heat & Glo