Repointing chimney brickwork with matched mortar in Broadview Park
Say yes before 72 hours pass from your free inspection, and save 10% on the joint work.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that the chimney mortar is failing
- Mortar eroded back from the brick face
- Joints that crumble when scraped
- Sandy grit at the base of the chimney
- Dark wet patches that linger on the brick
Jump to
Tuckpointing decisions for homes in Broadview Park
Pre-wetting brick that soaks up water
Some brick absorbs water readily. Federal preservation guidance suggests misting very absorbent masonry for a period before repointing begins. Otherwise the brick pulls moisture from the new mortar before it can set properly.
We check how quickly your brick takes up water during the inspection. If it is thirsty, we plan pre-wetting into the work and allow time for it. You may see us misting a face before any mortar goes on, and that is part of doing the joints properly.
Recessing joints where brick edges are worn
Weathered brick often has rounded edges. Federal preservation guidance suggests setting the new mortar slightly back from the face in that case. Filling flush to a rounded edge makes the joints look wider and leaves a thin feather of mortar that breaks easily.
We look at the brick edges before choosing how full to fill the joints. On worn brick, a slightly recessed joint looks truer to the original and lasts better at its edge. We explain this choice on the estimate, because it changes how the finished chimney looks.
Repointing out of direct sun on hot days
Mortar needs time to cure with water in it. Federal preservation guidance recommends doing repointing work in the shade where possible, because strong sunlight on a hot wall pulls water out of fresh joints before they bond.
We plan the work so the face being repointed is in shade where possible, and we cover it when it is not. That can mean starting on a different face in the morning and another in the afternoon. We explain the plan so the sequence makes sense to you.
Booking chimney repointing in Broadview Park
To arrange joint work in Broadview Park, phone us or send the form further down this page. Tell us what caught your eye on the chimney, and we will set up a free inspection at a time that works for you. There is nothing to prepare on the roof.
During the visit, we check the joints and the parts that shed water onto them, then talk you through what we found. The written estimate lists each area. Say yes within 72 hours following that free inspection, and a 10% discount is taken off the services you book.
Joint repair items on a written estimate
- Sample area where the finish matters
- Joint profile that sheds water
- Access plan for the stack above the roof
- Workmanship warranty on the agreed joints
Answers about chimney repointing
How does the 72-hour window work on repointing?
If you approve the repointing, or anything else on the estimate, before 72 hours have gone by since your free inspection, we take 10% off. The clock starts at your own visit.
Why did earlier repointing fall out of the joints?
Shallow preparation is a frequent reason. When old mortar is not raked deep enough, a thin skin of new mortar has little to grip. A mix that is too hard, or water still entering the wall, can also cause it.
Can you match a joint profile that has worn away?
We look for sheltered spots where the original profile survives, such as under the crown overhang. Where brick edges are worn, the new joint may sit slightly back from the face to avoid a thin, fragile edge.
More Ways to Care for Your Fireplace
- Firebox RepairRepair the damaged fireplace chamber using an approach suited to masonry or manufactured components.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo