Tuckpointing for chimneys in Miami Gardens
Chimney repointing in Miami Gardens, priced upfront with no hidden fees and recorded in writing.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signs the chimney joints need repointing
- Joints that crumble when scraped
- Gaps opening between brick and mortar
- Loose brick where joints have washed out
- Joint profile worn flat or recessed
Jump to
Choosing mortar for a chimney repoint
Finding the water before renewing the joints
Federal preservation guidance is clear about repointing alone. The cause of the deterioration has to be dealt with first, or the new mortar wears out the same way. On a chimney that cause is often water from somewhere above.
We check the crown, the cap, the flashing and the brick faces before proposing joint work. If one of them is feeding water into the masonry, we explain it and price it as a separate item. Repointing then protects a chimney that is no longer being soaked.
A small test area before the full repoint
On a visible chimney, a small sample area is worth doing first. Federal preservation guidance recommends test panels to confirm methods and materials, and brick industry guidance uses sample panels to judge a match. The area is prepared and repointed exactly as the full job would be.
You look at it when it has dried. If the color, texture and profile are right, the rest proceeds the same way. If something is off, we adjust the mix or the tooling before the whole chimney is committed to it. We explain whether your job warrants one.
Protecting fresh joints from heavy rain
Freshly tooled mortar is soft at the surface. Heavy rain can wash out fine material, streak the brick below and leave joints rough. Covering the work is part of the job when showers are likely.
If rain threatens, we protect the day's joints before we leave and may shift the schedule. We would rather lose a few hours than redo a face of joints. Tell us if you notice covers moved by wind, so we can reset them promptly. A face of joints protected for a day is worth the small delay.
Water repellents come after the joint work
Brick industry guidance puts repairs before coatings. Cracked and deteriorated joints are repointed first, then the chimney is given time. The same guidance suggests waiting several months to see whether a water repellent is needed at all.
Often the repairs solve the water problem on their own. If a repellent is still wanted, it should let the masonry release water vapor, and it will need reapplying over time. We discuss it as a separate item once the joints have settled, not as part of the repointing price.
Joint repair items on a written estimate
- Raking to an even, sound depth
- Head joints cleared by hand
- Brushing off excess mortar
- Cover over any opening left at the top
What people ask about chimney mortar
How long does new mortar take to cure?
Mortar hardens gradually and keeps gaining strength after it looks set. We keep new joints damp and shaded as needed and tell you what to avoid while it cures, such as washing the brick or using cleaners on it.
Can I use the fireplace while the chimney is being repointed?
The work is on the outside of the masonry, but fresh joints are still curing. We tell you whether a fire is fine during the project and when normal use can resume, based on where we worked and the mortar used.
Will you repoint the joints inside my firebox as well?
Firebox joints use refractory mortar and belong to firebox repair, a separate service. Chimney tuckpointing covers the exterior masonry. If both need work, each is priced on its own line so you can decide.
More Ways to Care for Your Fireplace
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Chimney WaterproofingTreat suitable chimney masonry after checking the surface, repair needs and product requirements.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo