Chimney repointing and mortar repair across West Miami
A water repellent is discussed only after the joints are sound and have had time to settle.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When chimney joints start to give way
- Joints that crumble when scraped
- Sandy grit at the base of the chimney
- Damp brick inside the attic by the chimney
- Stepped cracks following the mortar lines
Jump to
Chimney mortar repair, explained plainly
What chimney tuckpointing work covers
Tuckpointing on a chimney means removing mortar that has worn, cracked or crumbled and packing new mortar into the prepared joints. The bricks stay where they are. The work restores the joints so they shed water and hold the masonry together as intended.
We explain the boundary of the job at the inspection. Joint work covers the mortar between sound bricks. A brick that has lost its face, a cracked crown or loose flashing each needs its own repair. Keeping those apart makes the estimate easier to follow.
Clearing the vertical head joints by hand
The short vertical joints between bricks are called head joints. Federal preservation guidance says mechanical tools should not be used on them, because a slip cuts into the brick above or below. Brick industry guidance adds that a grinder cannot reach their full depth anyway.
We clear head joints with a chisel. The remaining mortar is taken out to the same depth as the long bed joints, so the finished joints match. It is careful work, and it is one of the places where a quick job and a good one differ most.
Matching the existing joint profile
Brick industry maintenance guidance says the last layer of repointing mortar should be tooled to match the original profile. A chimney repointed with a different joint shape can look patched even when the color is right.
We look for places where the original profile survives, often in sheltered spots near the crown overhang or at the roofline. We then choose a jointer that reproduces it. If the original profile is one that holds water, we raise that before matching it, so you can decide with the facts.
Booking chimney repointing in West Miami
To arrange joint work in West Miami, phone us or send the form further down this page. Tell us what caught your eye on the chimney, and we will set up a free inspection at a time that works for you. There is nothing to prepare on the roof.
During the visit, we check the joints and the parts that shed water onto them, then talk you through what we found. The written estimate lists each area. Say yes within 72 hours following that free inspection, and a 10% discount is taken off the services you book.
What your tuckpointing estimate lists
- Joint survey on every chimney face
- Water source notes before joint work
- Cover over any opening left at the top
- Written record of faces and joints renewed
Tuckpointing questions from homes in West Miami
Is a stronger mortar better for my chimney?
No. Repointing mortar should be softer and more vapor-permeable than the brick, and no stronger than the original mortar. A mix that is too hard pushes stress into the brick and can damage its face.
How does the 72-hour window work on repointing?
If you approve the repointing, or anything else on the estimate, before 72 hours have gone by since your free inspection, we take 10% off. The clock starts at your own visit.
What should I do to prepare for tuckpointing at my home?
Clear access to the chimney base, move vehicles away from that side of the house and keep pets indoors. Tell us about plants, vents or fragile roofing near the chimney. We handle protection and cleanup.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo