Waterproofing that protects chimney brick in Idlewyld
We repair the openings first, then apply a breathable repellent that keeps rain out and lets the brick dry.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Clues that the brick needs a repellent or repairs
- Some faces drying slower than others
- Clear coating peeling off the brick
- Worn, rounded brick edges from past blasting
- A sealing quote with no product named
Jump to
How we waterproof chimney masonry
Absorption and penetration are different problems
Brick absorbs water into its pores, and a repellent reduces that absorption. Water that penetrates right through a chimney wall usually travels through cracks and separations between brick and mortar. A repellent does little about those.
Knowing which is happening decides the job. Heavy absorption shows as brick that darkens and stays wet long after rain. Penetration shows as water getting through. We look for both and explain which one the treatment addresses, so the estimate does not promise more than a coating can deliver.
What the workmanship warranty covers
Our waterproofing carries a workmanship warranty. It applies to the cleaning, masking and application our team performed, on the faces the written record lists. Faces left out of the agreed work, and damage that starts somewhere else, sit outside it.
Product makers publish their own claims about how long a treatment lasts. We do not turn those into a promise about your whole chimney. Ask before you approve how a later problem would be looked at. We will explain how we separate our work from other causes.
When the test area changes the plan
A test area sometimes shows something the inspection could not. The brick may take far more product than expected, an old coating may stop the repellent soaking in, or the look may change more than you want.
If that happens, we stop and explain what the test showed. Any change to the scope, such as removing an old coating or choosing a different product, comes to you as a revised item with its own figure. Nothing beyond the agreed work goes ahead without your approval.
Damp on the chimney breast indoors
A damp or stained chimney breast inside the house has three likely causes. Water may be soaking through the faces, leaking in at the top or roof line, or forming inside the flue. Each needs a different answer.
We look at which it is before recommending treatment. Absorption through the faces tends to show after long rain and fade slowly. A leak tends to show soon after rain. Moisture from inside may appear in dry weather. The findings explain which pattern fits your chimney.
Scope notes for chimney waterproofing
- Roof junction flashing condition
- Overspray cleaned while it can still be removed
- Preparation debris cleaned up and hauled away
- Changes after the test priced separately
Questions about chimney waterproofing
Do repairs have to be finished before the treatment goes on?
Yes. Brick industry guidance puts repairs first, and product data asks for sealant joints to be in place and cured and for the top to be watertight. New mortar also needs its curing time. We set out that order in the estimate so nothing is rushed.
Can I apply a chimney sealer from a hardware store myself?
You can, but read the product data first. Some store products form films that trap moisture, and every product needs repairs done beforehand and glass and plants protected. Working at height on a roof is the other risk. The free inspection tells you what the chimney needs either way.
Will the treated brick still let moisture out?
With a breathable repellent, yes. It keeps most liquid water from soaking in while letting water vapor leave through the face. That matters on a chimney, because moisture reaches the masonry from inside as well, and a sealing film could hold it in.
More Ways to Care for Your Fireplace
- Ventless Gas Fireplace ServiceService the identified vent-free appliance without bypassing its required safety components.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Chimney Masonry RepairRepair affected chimney brickwork and joints with materials selected for the construction already in place.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo