Firebox joints and bricks repaired in Cooper City

Loose firebrick and open joints are repaired with refractory materials, after a free inspection and a written estimate.

Owned and run locally
Available for same-day service
Fully licensed and insured
Family owned and run

Call Now (645) 465-4171 Book Online

Signs the firebrick lining is failing

Firebrick pieces on the firebox floor
Backing masonry showing through a gap
Floor units loose under the grate
Stepped cracks climbing a side wall

Jump to

Repairing firebrick and mortar the right way

Closed glass screens and firebox joints

Glass screens across a masonry fireplace cut the room air drawn up the chimney. Brick industry guidance warns that burning with them closed can raise firebox temperatures enough to break down the mortar joints early and warp grates.

Let us know whether the screens stay shut while a fire burns. Joint loss that is heavier than the lining's age suggests can come from that habit. We explain it so the repaired joints are not put through the same conditions without you knowing.

Small fires first after a firebox repair

Fresh refractory mortar is cured by heat in stages. One maker's directions call for a low fire first and a hotter one later. A full fire on the first evening can drive moisture out too fast and crack new joints.

We tell you how long to wait and how to build the early fires for the product we used. Keep them small, keep them on the grate and watch the repaired area. If a joint cracks during curing, tell us rather than filling it yourself.

Firebox repair and chimney sweeping are separate jobs

Repairing the firebox lining does not include cleaning the flue, the smoke chamber or the smoke shelf above the damper. Those belong to our sweep service, with its own tools and its own line on any estimate.

If the chimney is due for cleaning, doing it before the firebox repair keeps soot and debris from falling onto fresh joints. We tell you when that order makes sense. If the chimney has been cleaned recently, the firebox repair can go ahead on its own.

A firebox floor that is no longer level

A floor that dips, rocks or has lifted at one edge suggests the base beneath it has moved. Loose floor units can simply be reset, but a sunken area may point to the hearth support under the firebox.

We check whether the unevenness is in the units or below them. Lifting a floor unit or two can show what the bed looks like. If the support has failed, we explain what that means and hold the floor repair until it is understood, because new units on a moving base crack again.

Your firebox estimate, wall by wall

Failed joints raked to sound depth
Damper seat checked and supported
Ash dump frame reset where present
Damper or leak items listed separately

Before you book a firebox repair

Can you replace only the firebricks that are damaged?

Often, yes. Where the rest of the lining is sound, we cut out the failed units and set new firebrick in thin refractory joints. If damage runs across whole walls, we explain why a rebuild of that wall may last longer.

Will the new firebrick match the old lining?

In size and thickness, we match it as closely as available stock allows. In color, new units start lighter and darken with use. We talk through any difference before the repair so there are no surprises.

Can the brick face around the opening be repaired at the same time?

Often, yes, as a separate line. The face uses different brick and mortar from the firebox, so it is repaired by its own rules. We keep the two apart on the estimate so you can see what each involves.

Proudly American

Local service. Careful repairs. A fireplace worth coming home to.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Chimney & Fireplace Brands We Work With

DuraVent
Olympia Chimney and Venting
Copperfield Chimney Supply
Rutland
Heatilator
Heat & Glo