Fireplace insert installers serving homes in Boca Del Mar

A wood insert turns an open fireplace into a closed room heater, and we plan that change carefully with you.

Owned and run locally
Available for same-day service
Fully licensed and insured
Family owned and run

Call Now (645) 465-4171 Book Online

Signs your fireplace is ready for a wood insert

Soot on the face above the opening
A liner that stops short of the top
A faceplate that no longer seals
A hearth too short for an insert

Jump to

Installing a wood insert the way its manual intends

Protecting the hearth during installation

An insert is heavy and has sharp metal edges. One maker's manual asks installers to protect the hearth extension with a heavy blanket or cardboard while the unit is moved into position. Tile, stone and finished floors are easy to chip at this stage.

We lay protection over the hearth and along the path to the fireplace before the insert comes in. Floors in the rest of the room are covered where we work. Any debris from the job is cleaned up and taken away when we leave.

Break-in fires for a new insert

A new insert gives off a paint odor during its early fires while the high-temperature paint cures. Manuals ask for moderate fires at first and ventilation while the odor lasts. Burning very hot too early can damage the finish.

We explain how many small fires the manual expects before full use and how to ventilate the room. Do not set anything on top of the insert while the paint cures. The early days can also bring harder starts as the firebrick and flue dry out.

Keeping the insert glass clear

Glass on an insert stays clearer when the fire burns hot enough and the wood is dry. Many inserts send a wash of air down the inside of the glass to help. Dark, heavy deposits on the glass usually mean the fire is too cool or the fuel is wet.

Clean the glass only when the insert is cool, and use a non-abrasive cleaner as the manual advises. Abrasives can scratch the ceramic surface. If the glass darkens quickly despite dry wood, ask us to look at the air settings and the draft.

Hot surfaces around children and pets

An insert's glass, door, faceplate and top become very hot during use. Manuals warn about serious burns and ask owners to keep children, clothing and furniture away and to warn children of the hazard. The faceplate stays warm for some time after the fire dies.

We point out the hottest surfaces at handover and where the manual places its warnings. Supervision matters more than any single device. Keep the loading door area clear, especially when young children or pets are in the room.

What we confirm before fitting an insert

Serial number and model record
Baffles and smoke deflector in place
No link to other flues or ductwork
Manual and listing details handed over

Common questions about liners and wood inserts

Does the insert blower need its own outlet?

The optional blower plugs into a grounded outlet near the fireplace. If none is suitable, an electrician adds one as a separate item. We coordinate the location so it suits the manual and is easier to reach before the faceplate goes on.

How close can furniture sit to a wood insert?

The manual for your model sets the clearances and the protected floor area, and furniture belongs outside them. We point out those zones at handover. Keep rugs, cushions and stored wood out of the area in front of the loading door.

What does the free inspection include for an insert in Boca Del Mar?

We look at the masonry fireplace, the smoke chamber, the damper, the chimney and flue, the hearth and the trim around the opening. We also check roof access for the liner work and measure the opening in three directions.

Proudly American

Family owned and operated in Miami, Florida.

Call Now (645) 465-4171

Book Your Free Inspection in Miami

(645) 465-4171

Chimney & Fireplace Brands We Work With

DuraVent
Olympia Chimney and Venting
Copperfield Chimney Supply
Rutland
Heatilator
Heat & Glo