A wood insert fitted to your fireplace in Coral Gate
The host fireplace gets a proper look first, because an insert depends on sound masonry around it.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Conditions we see before an insert goes in
- Drafts from an open damper
- An insert chosen before measuring
- A liner that stops short of the top
- A hearth too short for an insert
Jump to
Turning a masonry fireplace into a wood insert host
Clearances to side walls, facing and trim
Every insert label lists minimum clearances to combustible materials around it, such as side walls, the top facing and trim beside the opening. Those distances are measured from the unit, not from the old fireplace opening. Wood paneling or trim that was fine beside an open fireplace may now be too close.
We measure the combustible materials around your fireplace against the label of each insert you are considering. Where trim is too close, we explain whether it can be moved or replaced with noncombustible material. That work is a separate item, and it happens before the insert is installed.
The discount tied to your free inspection
Approving the insert installation within 72 hours of your free inspection brings 10% off the agreed work. The window starts from your own inspection, not from a date on a calendar we choose. It applies to the insert, the liner and the other items you approve together.
You are free to take longer and approve later without the discount. We prefer that you understand the scope rather than rush it. If a question stands between you and a decision, ask it, and we answer before the window closes.
Keeping the insert glass clear
Glass on an insert stays clearer when the fire burns hot enough and the wood is dry. Many inserts send a wash of air down the inside of the glass to help. Dark, heavy deposits on the glass usually mean the fire is too cool or the fuel is wet.
Clean the glass only when the insert is cool, and use a non-abrasive cleaner as the manual advises. Abrasives can scratch the ceramic surface. If the glass darkens quickly despite dry wood, ask us to look at the air settings and the draft.
Let the insert cool before any work
Manuals ask that the insert burn out and cool fully before baffles, air tubes or the flue collar are handled. Parts are fragile when hot and can shift or crack. The same applies to glass cleaning and gasket work.
We schedule maintenance and repairs for a time when the insert has not been used. If you have had a fire the evening before, tell us when you book. Working on a cool unit is safer for everyone and gentler on the parts, and it lets us see the firebox clearly.
Insert items you approve before work in Coral Gate
- Chimney cleaning before relining
- Liner insulation where instructions require
- Top plate and liner cap
- Removal of an old insert if present
Insert installation questions, answered plainly
What happens to the damper when the insert goes in?
If the damper control will be out of reach, manuals require the damper to be removed or fixed open so the liner can pass. We explain which applies to your fireplace, and the change is noted in your written record.
Can the insert connect to my home's air conditioning ducts?
No. Insert manuals warn against connecting to any air distribution ductwork unless the manual approves it specifically. The insert heats the room it sits in, and its flue gases go only up the liner.
How is the discount for booking quickly applied?
If the insert and liner are approved while fewer than 72 hours have passed since your free inspection, 10% comes off what you agreed. Nothing about the discount asks you to decide before we have looked at the fireplace, since the clock begins at your own inspection.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo