Your masonry fireplace, fitted with a wood insert in Lauderdale Beach
Approve nothing until the scope reads right to you. The estimate lists every part of the insert installation.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Problems a new wood-burning insert can address
- A liner that stops short of the top
- A faceplate that no longer seals
- No floor protection in front of the unit
- An insert that is hard to light
Jump to
Fitting a fireplace insert, from host to handover
How the insert's height changes floor protection
The thermal protection needed under the floor area in front of an insert can depend on how high the unit sits above the hearth. One maker requires insulated floor protection when the unit sits close to the hearth and drops that requirement when it sits higher. Each manual sets its own rule.
We look at where the insert will sit relative to your hearth and floor. Sometimes a slightly raised position changes what the floor needs. We explain the options with the manual open, so you can weigh appearance against the protection each option requires.
Replacing an old insert
Replacing an older insert starts with removing it and looking at what it was connected to. The existing liner may not match the new insert's size or listing, and it is worth confirming a full-length liner exists at all. The hearth and faceplate may need changes too.
We check the old liner, the host fireplace and the hearth against the new manual. Where parts can stay, we say so and explain why. Where they cannot, the new items are listed separately, and the old insert and parts are hauled away.
Gas and electric inserts are other services
This installation service covers wood-burning inserts. Gas inserts need a sealed vent system and a gas supply, and electric inserts need power but no combustion venting at all. Each has its own rules and its own service.
Tell us which fuel you want when you call, and we arrange the right visit. If you are undecided, we explain the practical differences for your fireplace. You then choose with the whole installation in mind, not only the look of the flame.
When the door stops sealing tightly
The door gasket compresses over time, and the latch may need adjusting to keep the seal tight. Manuals describe that adjustment and the gasket replacement when the rope wears out. A door that no longer seals lets air in around the fire and makes it harder to control.
We check the gasket and latch during maintenance visits and explain what the manual allows owners to adjust. Replacement gasket comes from the parts list for your model, fixed with the adhesive the manual names. A good seal keeps the air control doing its job.
The insert checklist behind your estimate in Lauderdale Beach
- Host fireplace condition check
- Air control and blower walkthrough
- Written record of the insert installation
- Removal of an old insert if present
Insert installation questions, answered plainly
What if my chimney already has a liner from an older insert?
We check whether the existing liner matches the new insert's size, runs the full height and belongs to a listed system in good condition. If it does, we explain that option. If not, a new liner is listed as a separate item.
How often does an insert need a maintenance visit?
It depends on how much and how you burn. Manuals ask for regular checks of the chimney connector and liner during the burning season. Our maintenance visits cover the liner, cap, baffles, gasket and glass.
What kind of wood should we burn in the insert?
Dry, split, seasoned natural wood, as the manual specifies. Treated or painted wood, garbage, cardboard and colored paper stay out. We explain how to judge dryness at handover, including with a simple moisture meter.
More Ways to Care for Your Fireplace
- Chimney TuckpointingRenew deteriorated mortar joints around chimney bricks that can appropriately remain.
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo