A wood insert fitted to your fireplace in Little River
One insert, one liner, one flue. The liner hangs from the top and connects straight to the insert collar.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Problems a new wood-burning insert can address
- A liner that stops short of the top
- Rusty panels on an old insert
- A hearth too short for an insert
- An insert that is hard to light
Jump to
Turning a masonry fireplace into a wood insert host
Clean and check the chimney before relining
Insert and liner instructions both call for the existing chimney to be cleaned and checked before the liner goes in. Soot, deposits and loose debris can block the liner's path or hide damage in the flue. Starting clean also gives a true picture of the masonry.
We clean the flue as a separate step and look for cracked, loose or missing masonry along the way. What we find is explained before the liner work continues. If a repair is needed, it is priced on its own, and the relining waits until it is finished.
Emission limits shown on the label
Current wood inserts carry a label showing the emission standard they meet. One maker's manual states that its insert meets the EPA 2020 emission limits for wood heaters. Low emissions in practice depend on dry wood and correct operation as well as on the design.
We show you where the label is on the model you choose and what it says. Keep the manual, because it explains how the insert was tested and how to run it cleanly. We describe emissions only as the label states them.
Keeping the insert door closed
An insert is designed to burn with its door closed. Manuals warn that a door left partly open can draw gases and flame out of the unit. EPA guidance also says to keep wood-burning appliance doors closed except when loading or stoking. The glass door is part of the safety design.
We show you the loading routine the manual gives, including opening the air control before slowly opening the door. That order reduces smoke rolling out during reloading. Close the door and latch it as soon as the wood is in.
Comparing insert installation proposals
Two insert quotes can differ widely because they describe different jobs. One may include a full-length liner, insulation, a top plate and cap, the faceplate and hearth work, while another covers only the unit and a short connector. Compare the items, not only the totals.
Ask each installer which liner system they plan to use and whether it runs to the top of the chimney. Ask how the floor protection meets the insert's manual. Our estimate answers those questions line by line, and we are glad to walk you through it.
The insert checklist behind your estimate in Little River
- Liner insulation where instructions require
- Metal tag fixed to the fireplace
- Noncombustible hearth extension check
- Removal of an old insert if present
Wood insert installation, in questions and answers
What happens to the damper when the insert goes in?
If the damper control will be out of reach, manuals require the damper to be removed or fixed open so the liner can pass. We explain which applies to your fireplace, and the change is noted in your written record.
How do I know the insert meets current emission limits?
The label on the insert shows the standard it meets. Current wood inserts carry a label stating that they meet the EPA 2020 emission limits. We show you the label on your model and keep its details in the written record.
Is the chimney cleaned before the liner is installed?
Yes. Insert and liner instructions call for the chimney to be cleaned and checked first. We do that as a separate step, look for damaged masonry and explain any repair before relining continues.
More Ways to Care for Your Fireplace
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo