Your masonry fireplace, fitted with a wood insert in Parkland
Wood inserts that meet EPA 2020 emission limits, installed with the clearances and hearth protection their manuals set.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Fireplaces and old inserts that bring people to us
- An open fireplace you want to heat with
- Smoke puffing from an existing insert
- A liner that stops short of the top
- An insert that is hard to light
Jump to
Engineering notes on installing a wood insert
Keeping the insert door closed
An insert is designed to burn with its door closed. Manuals warn that a door left partly open can draw gases and flame out of the unit. EPA guidance also says to keep wood-burning appliance doors closed except when loading or stoking. The glass door is part of the safety design.
We show you the loading routine the manual gives, including opening the air control before slowly opening the door. That order reduces smoke rolling out during reloading. Close the door and latch it as soon as the wood is in.
Choosing the faceplate finish
Faceplates usually come in a few finishes and sizes, and some offer trim pieces that frame the edge. The choice is mostly about looks, provided the faceplate covers the opening fully. The fireplace face around it stays visible.
Bring ideas about the look you want, and we show the options the maker offers for your model. We explain which size covers your opening and how the trim meets the brick or stone. Finish choices do not change the clearances, which the label sets.
If smoke appears after the insert is installed
Smoke in the room after installation usually comes from a few causes that manuals list. They include baffles out of place, weak draft, wet wood, a blocked cap and strong exhaust fans running. Opening the door too quickly while reloading is another common one.
Start with the fuel and the loading routine, then turn off strong fans and try again. If smoke continues, stop using the insert and tell us. We check the baffles, the connection, the liner and the cap and explain what we find.
Signs the house is pulling against the chimney
When exhaust fans or a tight house pull air out of the room, an insert can struggle to draw. Smoke at the door during loading, a lazy fire or odors when the insert is cold can all point that way. Manuals list downdraft and competing fans among the causes to check.
We check the fans in the house and the air supply near the insert when a draft complaint comes up. Sometimes the fix is as simple as opening a nearby window slightly while the fire burns, as one manual suggests. We explain what we find and what else may help.
Items on a wood insert estimate in Parkland
- Masonry repairs as separate items
- Appliance connector and high-temperature sealant
- Side wall and facing clearances
- Separate pricing for insert and liner
Questions about fireplace insert installation in Parkland
Is the chimney cleaned before the liner is installed?
Yes. Insert and liner instructions call for the chimney to be cleaned and checked first. We do that as a separate step, look for damaged masonry and explain any repair before relining continues.
What if my mantel is close to the fireplace opening?
The insert's label gives a minimum height for a combustible mantel. We measure yours against it before you choose a model. If it is too low, we explain the options, which may include a different insert.
What happens to the chimney top while the liner goes in?
The liner is usually installed from the roof. Any open chimney top is covered at the close of each work day until the top plate and cap are set. Old parts and packaging leave with us when the job is finished.
More Ways to Care for Your Fireplace
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Top-Sealing Damper InstallationFit a top-mounted damper only after checking the fireplace, product restrictions and control route.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo