Wood-burning insert installation for homes in Poinsettia Heights
Any open chimney top is covered when we finish each working day, and the debris goes away with us.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Fireplaces and old inserts that bring people to us
- Smoke puffing from an existing insert
- A worn insert with a warped door
- A liner that stops short of the top
- Mortar gaps inside the firebox
Jump to
What goes into a wood-burning insert installation
A liner from the insert to the chimney top
Current insert manuals call for a continuous liner running from the insert's flue collar all the way to the top of the chimney. The old masonry flue becomes an enclosure for that liner rather than the path for smoke. A short connector into the bottom of the flue does not meet that requirement.
We plan the liner as part of the insert, not as an optional extra. The estimate names the liner system, its length and how it attaches at each end. You see the whole path the smoke will take before you approve anything.
Check the insert's permitted flue connection
The selected insert and liner instructions determine the permitted flue connection. The DuraLiner system cited here calls for a dedicated liner, while other systems must be checked against their own listings and manuals. An unsuitable shared flue can send smoke or combustion gases into a room.
If your chimney has more than one flue, we identify which one serves the fireplace. If another appliance already uses the fireplace flue, we explain the conflict before any work is planned. The written record notes which flue the insert uses.
No connection to heating or cooling ductwork
Insert manuals warn against connecting the unit to any air distribution ductwork unless the manual specifically approves it. The insert is a room heater, and its combustion gases and heat belong in the liner and the room, not in the home's duct system.
We check that nothing ties the insert to the heating and cooling system. If someone has suggested routing warm air from the insert elsewhere, we explain what the manual allows. Anything beyond that stays out of the installation, and the record says so.
Break-in fires for a new insert
A new insert gives off a paint odor during its early fires while the high-temperature paint cures. Manuals ask for moderate fires at first and ventilation while the odor lasts. Burning very hot too early can damage the finish.
We explain how many small fires the manual expects before full use and how to ventilate the room. Do not set anything on top of the insert while the paint cures. The early days can also bring harder starts as the firebrick and flue dry out.
What the free inspection covers before an insert
- Host fireplace condition check
- Insert model matched to the opening
- Liner insulation where instructions require
- Mantel and trim clearance check
Your fireplace insert questions in Poinsettia Heights
Do you handle gas inserts or electric inserts as well?
Gas and electric inserts are handled by our other services, each with its own rules. This service is for wood-burning inserts only. Mention the fuel you have in mind, and the visit is arranged for the right job.
What happens to the chimney top while the liner goes in?
The liner is usually installed from the roof. Any open chimney top is covered at the close of each work day until the top plate and cap are set. Old parts and packaging leave with us when the job is finished.
Can an insert go into a fireplace with cracked firebrick?
Not until the firebrick is repaired. Insert manuals require a sound host free of cracks and loose mortar. The repair is a separate item handled by our firebox repair service before the insert is installed.
More Ways to Care for Your Fireplace
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Prefab and Zero-Clearance Fireplace RepairIdentify and repair manufactured fireplace components using the appropriate model information.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo