Installing a fireplace insert in Sweetwater, host first
One insert, one liner, one flue. The liner hangs from the top and connects straight to the insert collar.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Problems a new wood-burning insert can address
- An open fireplace you want to heat with
- Cracked glass on an old insert
- A fireplace you want closed up neatly
- A liner that stops short of the top
Jump to
Fitting a fireplace insert, from host to handover
A listed liner system, installed to its instructions
Stainless liners for relining masonry chimneys are tested and listed under the chimney liner safety standard. Each system comes with instructions for its pipe, connectors, insulation, top plate and cap. The code expects the lining to suit the appliance under that appliance's listing.
We use a listed liner system and install every piece to its instructions. Parts from different liner makers are not mixed, because the instructions forbid it. Your written record names the liner system, so the next person who services the chimney knows what is there.
A metal tag fixed to the altered fireplace
Some insert manuals supply a metal tag to be fixed to the fireplace when it has been modified for a liner. The tag stays visible in case the insert is removed later. It tells the next person that the fireplace was altered to take an insert.
We attach the tag where the manual shows and mention it in the written record. If you ever take the insert out, the damper and liner changes may need attention before any open fire. Ask us before using the fireplace that way, and we explain what is needed.
How the insert's height changes floor protection
The thermal protection needed under the floor area in front of an insert can depend on how high the unit sits above the hearth. One maker requires insulated floor protection when the unit sits close to the hearth and drops that requirement when it sits higher. Each manual sets its own rule.
We look at where the insert will sit relative to your hearth and floor. Sometimes a slightly raised position changes what the floor needs. We explain the options with the manual open, so you can weigh appearance against the protection each option requires.
Sounds a new insert makes as it heats
Metal expands as it heats and contracts as it cools, so a new insert can make cracking and popping sounds as it warms up. Manuals describe these noises as normal and say they become minimal once the unit reaches temperature. They are different from the roaring of an overfired unit.
We explain which sounds to expect and which ones deserve a call. Loud, persistent roaring with glowing metal is a warning sign, while ticking during warm-up is not. If you are unsure what you are hearing, describe it to us and we can advise.
Insert items you approve before work in Sweetwater
- Opening height, width and depth measured
- Liner insulation where instructions require
- Top plate and liner cap
- Mantel and trim clearance check
Insert installation questions, answered plainly
What happens to the damper when the insert goes in?
If the damper control will be out of reach, manuals require the damper to be removed or fixed open so the liner can pass. We explain which applies to your fireplace, and the change is noted in your written record.
What if my chimney already has a liner from an older insert?
We check whether the existing liner matches the new insert's size, runs the full height and belongs to a listed system in good condition. If it does, we explain that option. If not, a new liner is listed as a separate item.
Is the chimney cleaned before the liner is installed?
Yes. Insert and liner instructions call for the chimney to be cleaned and checked first. We do that as a separate step, look for damaged masonry and explain any repair before relining continues.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo