Insert installation for masonry fireplaces in Twin Lakes North
Any open chimney top is covered when we finish each working day, and the debris goes away with us.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Fireplaces and old inserts that bring people to us
- An open fireplace you want to heat with
- Drafts from an open damper
- Rusty panels on an old insert
- Mortar gaps inside the firebox
Jump to
What goes into a wood-burning insert installation
How you plan to use the heat
Some owners want an insert for steady warmth through cool evenings, while others want an occasional fire behind glass. Manuals describe a range of heat output and warn against running a unit too slowly for long periods. The right size depends on the room and the use.
Tell us about the room, the ceiling height and how often you expect to burn. We explain how the models you are considering behave at low and high settings. An insert that is too large for the space tends to be run low, which the manuals discourage.
Where an insert heats best
Insert manuals note that a unit performs best in the main living areas of the home. They also favor a chimney that runs mostly inside the house rather than along an exterior wall. You may not be able to change either, but both affect what to expect.
We explain how your fireplace's position and chimney run are likely to affect the insert's heat and draft. If the chimney is on an outside wall, liner insulation becomes more important. The estimate reflects those details rather than a one-size answer.
If smoke appears after the insert is installed
Smoke in the room after installation usually comes from a few causes that manuals list. They include baffles out of place, weak draft, wet wood, a blocked cap and strong exhaust fans running. Opening the door too quickly while reloading is another common one.
Start with the fuel and the loading routine, then turn off strong fans and try again. If smoke continues, stop using the insert and tell us. We check the baffles, the connection, the liner and the cap and explain what we find.
When the opening is larger than the insert
A large fireplace opening can take a smaller insert, provided the faceplate covers the gap and the manual allows the arrangement. Oversize faceplates exist for this reason. The liner, hearth and clearances follow the insert, not the size of the opening.
We measure the opening and compare it with the largest faceplate the maker offers. If the gap is too big to close neatly, we explain the options, including a different model. The goal is an insert that looks finished and meets its manual.
Scope lines for a wood-burning insert
- Opening height, width and depth measured
- Appliance connector and high-temperature sealant
- Metal tag fixed to the fireplace
- Mantel and trim clearance check
Wood insert installation, in questions and answers
Does the insert blower need its own outlet?
The optional blower plugs into a grounded outlet near the fireplace. If none is suitable, an electrician adds one as a separate item. We coordinate the location so it suits the manual and is easier to reach before the faceplate goes on.
Why does the new insert smell during its early fires?
The high-temperature paint cures during the break-in fires and gives off an odor, which manuals describe as expected. Keep those fires moderate, ventilate the room and set nothing on top of the insert until the curing is done.
How close can furniture sit to a wood insert?
The manual for your model sets the clearances and the protected floor area, and furniture belongs outside them. We point out those zones at handover. Keep rugs, cushions and stored wood out of the area in front of the loading door.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo