Installing a fireplace insert in West Perrine, host first
We check the masonry fireplace, the chimney and the hearth before a wood insert is chosen for your home in West Perrine.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Old insert trouble and open fireplace frustrations
- A fireplace you want closed up neatly
- Drafts from an open damper
- A liner that stops short of the top
- Rusty panels on an old insert
Jump to
Fireplace insert work for homes in West Perrine
No cutting bricks to squeeze an insert in
When an insert is slightly too large, it can be tempting to chip away brick or mortar to make room. Manuals say not to remove bricks or mortar from the masonry fireplace. The firebox walls are part of what keeps heat away from the framing around it.
If the insert you like does not fit, we look for one that does. Measuring before buying avoids most of these situations. Where no suitable model fits the opening, we explain the options honestly rather than weakening the host to suit the unit.
A listed liner system, installed to its instructions
Stainless liners for relining masonry chimneys are tested and listed under the chimney liner safety standard. Each system comes with instructions for its pipe, connectors, insulation, top plate and cap. The code expects the lining to suit the appliance under that appliance's listing.
We use a listed liner system and install every piece to its instructions. Parts from different liner makers are not mixed, because the instructions forbid it. Your written record names the liner system, so the next person who services the chimney knows what is there.
Check the insert's permitted flue connection
The selected insert and liner instructions determine the permitted flue connection. The DuraLiner system cited here calls for a dedicated liner, while other systems must be checked against their own listings and manuals. An unsuitable shared flue can send smoke or combustion gases into a room.
If your chimney has more than one flue, we identify which one serves the fireplace. If another appliance already uses the fireplace flue, we explain the conflict before any work is planned. The written record notes which flue the insert uses.
Blower habits when the door opens
One maker's manual says the blower must be switched off whenever the fuel door is opened. Before switching it back on, you check that no embers have dropped onto the hearth near the blower. It is a small habit that the manual treats as important.
We explain the blower controls at handover, including the automatic setting where the model has one. Some blowers switch on as the insert warms and off as it cools. Knowing how yours behaves makes it easier to follow the manual's advice.
What the free inspection covers before an insert
- Firebox and smoke chamber inspection
- Chimney cleaning before relining
- Opening height, width and depth measured
- Air control and blower walkthrough
Your fireplace insert questions in West Perrine
Can I use my old fireplace grate inside the insert?
Many insert manuals say not to use a grate or andirons and to build the fire directly on the firebrick floor. We remove any old grate before installation and show you how the manual wants the wood arranged.
What if my mantel is close to the fireplace opening?
The insert's label gives a minimum height for a combustible mantel. We measure yours against it before you choose a model. If it is too low, we explain the options, which may include a different insert.
What kind of wood should we burn in the insert?
Dry, split, seasoned natural wood, as the manual specifies. Treated or painted wood, garbage, cardboard and colored paper stay out. We explain how to judge dryness at handover, including with a simple moisture meter.
More Ways to Care for Your Fireplace
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney Chase Cover ReplacementReplace the chase top with a properly planned cover and clearly defined pipe connections.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo