Factory-built or masonry fireplaces, installed in Boca Pointe
We explain each decision before you approve it, from the model and hearth to the chimney termination.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Signals that a prefab unit needs replacing
- Discontinued model with no listed parts
- Smoke rolling out of an old unit
- Old chimney pipe with separated joints
- An old unit that fails its listing
Jump to
Fireplace installation choices explained for Boca Pointe homes
What the listing label on a unit tells you
Every factory-built fireplace must carry a listing label, and the code requires installation under the conditions of that listing. The label names the maker, the model and the standard it was tested to. It points to the manual that holds the clearances, framing sizes and approved parts.
We read the label and the manual before we price anything. If you already own a unit, look for the label or the paperwork and share the model when you call. That detail lets us bring the right questions to the free inspection instead of general guesses.
Air returns and attic ducts near the chimney
Manuals ask that return grilles for heating and cooling not sit right next to the fireplace. A strong return can tug at the opening and upset the draft. They also list sealed joints on attic ductwork and air handlers among the conditions for good performance.
We note returns and attic duct runs close to the proposed location. If one sits too close, moving it belongs to your air conditioning contractor, and we list it as coordination rather than our own work. You decide whether to adjust the plan or the return.
Supporting the chimney weight in the framing
Where a factory-built chimney is carried by joists or rafters, the code requires those members to be designed for the added load. Tall runs may also need wall supports or roof supports from the chimney maker. The supports are listed parts, installed at the heights the manual allows.
We check the framing that will carry the chimney and plan the listed supports. If a joist needs reinforcing, that carpentry is written as its own item. You see where the weight goes and what holds it, rather than trusting it to work out.
Keeping the termination cap clear
Manuals ask owners to confirm that the termination cap stays clear of leaves, nests and other blockages, and to watch for corrosion or separated sections. A blocked cap can send smoke back into the room. Some of this can be judged from the yard, and the rest belongs to a maintenance visit.
We show you where the cap is and what normal looks like. If you notice debris on it, a bent screen or rust streaks below it, tell us rather than climbing up yourself. Cleaning the cap follows the manual, which describes how its top comes off.
Scope lines for installing a wood fireplace
- Outside combustion air supply
- Noncombustible board and face materials
- Old chimney pipe removal and disposal
- Separate pricing for each installation item
New fireplace questions, answered plainly
What happens to the roof opening at the end of each day?
Any open roof penetration is covered at the end of every work day until the chimney is sealed. Debris is gathered daily and taken away with us once the job is complete. Tell us about anything else on the roof we should protect.
Why does a brand new fireplace smell during early fires?
Manuals describe an industrial odor while oils and binders burn off and the paint cures. It is expected during the break-in fires. Ventilate the room while it lasts, and tell us if the smell continues well beyond that period.
Could you install a gas or electric fireplace instead?
Those are separate services with their own rules and parts. This installation service covers wood-burning fireplaces. Tell us which fuel you prefer when you call, and we arrange the right visit and scope for it.
More Ways to Care for Your Fireplace
- Chimney Crown RepairRepair the damaged chimney top with an approach matched to the crown and supporting masonry.
- Fireplace RestorationCoordinate fireplace repairs while preserving suitable existing features and defining the intended use.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Stone Chimney RepairRepair affected stone chimney surfaces with the supporting construction and visual match considered together.
- Chimney Flue RepairAssess repairs to damaged existing flue linings and distinguish them from a new liner installation.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo