Your new fireplace in Durrs, installed to its listing
A free inspection in Durrs, a written estimate with separate line items, and no hidden fees on the final bill.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What starts a fireplace installation project in Durrs
- Missing parts nobody can identify
- A masonry fireplace you want built new
- Chimney parts from mixed brands
- An enclosure too small for newer units
Jump to
Installation decisions for a wood fireplace in Durrs
Mantel height and depth follow the manual
If you plan a mantel above the opening, its height and projection are set by the unit's manual, not by taste alone. Deeper mantels generally have to sit higher. A combustible shelf placed too low can overheat, even when the fire looks well contained.
We mark the lowest allowed mantel position on the framing before the wall is finished. The mantel itself is not part of our work, so share the marked height with whoever supplies it. The mark saves an expensive correction once the stone or tile is set.
Firebox depth and throat set by code
The code gives a masonry firebox a minimum depth and places the throat a set distance above the opening. The passage through the throat, damper and smoke chamber may not be smaller than the flue itself. These proportions decide how well smoke leaves the room.
A shallow, tall Rumford-style firebox is allowed under its own set of proportions. If you like that look, we explain what changes in the design. Either way, the proportions are drawn before construction so the fireplace draws as well as it looks.
Attic hatches, light fixtures and a wood fire
A wood fire draws air from the room, and gaps between the house and the attic can compete for it. Manuals recommend sealed recessed light fixtures, a weather-stripped attic hatch and sealed joints on attic air handlers near the fireplace. These details help the fire get the air it needs.
We point out obvious leaks near the fireplace during the inspection. Sealing them usually belongs to you or another trade, and we list what we saw. The outside air supply then does its job without fighting air losses elsewhere.
Chimney metal where sea air reaches the roof
Where salt-laden air reaches the roof, galvanized steel loses its protective zinc faster. The American Galvanizers Association explains that chlorides in marine air form soluble compounds that wash away and expose fresh zinc. Termination caps, chase tops and storm collars sit right in that exposure.
We ask the chimney maker which termination and chase top materials it lists for this setting and explain the options. Different metals touching each other can also corrode faster in a corrosive setting, so fasteners come from the listed system. The choice is written into your estimate.
Parts of the job your installation estimate separates
- Floor, ceiling and attic framing check
- Roof opening and termination cap
- Noncombustible board and face materials
- Firebrick, baffle and refractory placement
Asked before a fireplace installation in Durrs
Should I pick the fireplace model before your visit?
It is better to wait. The inspection shows what the framing, attic and roof allow, and some models will not suit them. We can compare a few candidates with you afterward, so the unit you buy fits the installation it needs.
Could you install a gas or electric fireplace instead?
Those are separate services with their own rules and parts. This installation service covers wood-burning fireplaces. Tell us which fuel you prefer when you call, and we arrange the right visit and scope for it.
Does a new wood fireplace need a damper?
A masonry fireplace must have a ferrous metal damper operable from the room, under the code. A factory-built unit includes the damper its maker designed. Either way, the damper stays fully open while a fire burns.
More Ways to Care for Your Fireplace
- Smoke Chamber RepairRepair identified smoke-chamber surfaces with the access and material requirements clearly defined.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Chimney RebuildRebuild the affected chimney section with the retained structure, roof connection and passage included in the plan.
- Chimney Flashing RepairRepair the chimney-to-roof connection with a scope that accounts for the adjoining roofing and masonry.
- Hurricane and Storm Damage Chimney RepairAssess storm-related chimney concerns and distinguish temporary protection from permanent component repair.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo