Installing a wood fireplace in Goulds, start to finish
A free inspection in Goulds, a written estimate with separate line items, and no hidden fees on the final bill.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
When a new fireplace is the right call in Goulds
- Renovation plans that include a fireplace
- An enclosure too small for newer units
- Unused wood fireplace ready for replacement
- Framing too close to the old unit
Jump to
From listing label to first fire, the installation
Map the joists before choosing the wall
A factory-built fireplace sends its chimney straight up through floors, ceilings and the attic. Where it lands relative to the joists and rafters decides how much framing must be cut and headed off. A spot a little to one side can mean far less structural work.
We check the ceiling framing and the attic along the proposed path during the free inspection. Tell us about attic access, stored items and any ductwork up there. What we find goes into the estimate as its own framing item, so you can see its effect on the plan.
An insulation shield in the attic
Where a factory-built chimney passes through an insulated attic, the code calls for a metal insulation shield around the pipe. The shield keeps loose or blown insulation away from the chimney and holds the air space open. Listed systems supply their own shield with its own instructions.
We fit the shield and check the insulation around it before leaving the attic. If more insulation is blown in later, the installer needs to know the shield is there. Mention any planned insulation work, and we note the shield location on your written record.
Building a chase for an exterior chimney
A chimney that runs up the outside of the house must be enclosed in a chase. Manuals ask for that chase to be built like the other outside walls, sealed against air leaks and fitted with false ceilings and firestops as it rises. It is a small wall system of its own.
We explain how the chase ties into your exterior finish and roof. Stucco, siding or another cladding may need its own trade, and the estimate says so. The chase framing, the firestops inside it and the chase top are listed as separate items.
Firebox walls of solid masonry and firebrick
In a masonry fireplace, the firebox walls are solid masonry, usually lined with firebrick laid in medium-duty refractory mortar. The code sets a minimum wall thickness with and without that lining, and a tight maximum joint width for the firebrick. Ordinary brick and mortar are not substitutes.
We explain the firebox construction in your proposal, including the brick, the lining and the mortar used. Tell us if you have a particular firebrick color or pattern in mind. The pattern can change, while the materials and thicknesses stay within what the code allows.
The fireplace installation scope, item by item
- Decorative shroud limits under the listing
- Electrical coordination for a blower kit
- Separate pricing for each installation item
- Grate, screen and supplied accessories check
Fireplace installation questions raised in Goulds
Do you set the tile or stone around the opening?
Only if the estimate names it. Often the finish belongs to a tile setter or mason. Either way, we mark the noncombustible zones and the mantel limit so whoever sets the finish works to the manual.
Could you install a gas or electric fireplace instead?
Those are separate services with their own rules and parts. This installation service covers wood-burning fireplaces. Tell us which fuel you prefer when you call, and we arrange the right visit and scope for it.
Do kitchen fans and bathroom fans affect a wood fireplace?
They can. Exhaust fans remove air from the house, and the fire needs air to replace what goes up the chimney. We review the fans and the outside air plan together, and at handover we explain how to start fires with the strongest fans off.
More Ways to Care for Your Fireplace
- Chimney Liner Installation and ReliningPlan a compatible chimney liner installation with the existing passage, connections and maintenance access considered together.
- Chimney Cap Installation and ReplacementProtect the chimney opening with a cap chosen for its fit, attachment and compatible system.
- Chimney Sweep and Chimney CleaningArrange careful chimney cleaning in Miami with a defined scope, protected work area and useful findings.
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo