Installing a wood fireplace in Lauderdale Harbours, start to finish
The chimney that comes with a factory-built fireplace is part of its listing, and we install it that way.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
What starts a fireplace installation project in Lauderdale Harbours
- Discontinued model with no listed parts
- Smoke rolling out of an old unit
- New construction with framing still open
- An enclosure too small for newer units
Jump to
Installation decisions for a wood fireplace in Lauderdale Harbours
Masonry fireplaces listed for contact with wood
Some masonry fireplace systems are built from listed components and tested to the factory-built fireplace standard for contact with combustibles. When installed to their instructions, the code lets combustible material touch their outer surfaces. They sit between a factory-built unit and a traditional brick fireplace.
We explain whether one of these systems suits your plan and what its instructions require. The listing still controls the hearth, chimney and clearances. It simply changes what the surrounding framing may do, which can help in a tight room.
Check whether repair can save the unit
Not every tired factory-built fireplace needs replacing. A cracked refractory panel, a worn grate or a damaged screen can often be replaced with listed parts. Replacement makes sense when the firebox metal has failed, the chimney is compromised or listed parts are no longer made.
We look at the unit with both answers open. If a listed-parts repair is sound, we say so and point you to our prefab fireplace repair service. If the unit has reached the end of its safe life, we explain the reasons in writing.
Alarms and an extinguisher near the new fireplace
Manuals for wood fireplaces recommend a smoke alarm on each floor of the home and a fire extinguisher near the fireplace. They also recommend a household plan with more than one way out. These steps cost little next to the protection they add.
We mention these at handover because a new fireplace changes the room. Keep alarms for smoke and carbon monoxide working, and test them as their makers direct. None of this replaces the manual, which remains your reference for safe use.
Finishing an exterior chase to match the house
An exterior chase can be clad to match the house, with siding, stucco, brick or stone veneer, as the manual and the local code allow. The cladding has to respect the chimney's clearances inside the chase and keep water out at the top.
We explain which cladding work we include and which needs another trade. If the chase is to match an existing wall finish, we discuss how close a match is realistic. The chase top and the storm collar are coordinated with the cladding so water sheds cleanly.
Separate items in a new fireplace proposal
- Floor, ceiling and attic framing check
- Clearances to framing and finishes
- Header and framing near the unit
- Surrounding finish boundaries for other trades
Fireplace installer questions we hear in Lauderdale Harbours
Can the old chimney pipe stay when a prefab unit is replaced?
Usually not. The new fireplace is listed with its own chimney, and mixing it with pipe from another system breaks that listing. We check the old pipe's markings and the new manual, and explain the rare cases where the maker allows reuse.
Is there a discount if we approve the installation quickly?
Yes. When you approve the fireplace work inside the 72 hours after your free inspection, 10% comes off the agreed price. The window starts from your own inspection, and the estimate is yours to review before you decide.
Do kitchen fans and bathroom fans affect a wood fireplace?
They can. Exhaust fans remove air from the house, and the fire needs air to replace what goes up the chimney. We review the fans and the outside air plan together, and at handover we explain how to start fires with the strongest fans off.
More Ways to Care for Your Fireplace
- Fireplace Hearth RepairRepair the hearth surface after considering the supporting assembly and fireplace requirements.
- Spalling Brick Repair and Chimney Brick ReplacementReplace deteriorated chimney bricks while retaining suitable surrounding masonry.
- Wood-Burning Fireplace Insert InstallationFit a wood-burning insert after assessing its host fireplace and full connection requirements.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo