Fireplace installation planned for homes in Miramar
From footing to flue, a masonry fireplace follows the Florida Building Code's fireplace chapter step by step.
- Owned and run locally
- Available for same-day service
- Fully licensed and insured
- Family owned and run
Worn prefab units and empty walls we plan around
- A prefab unit with a warped firebox
- An exterior chase that needs a new unit
- A second fireplace for another room
- Chimney parts from mixed brands
Jump to
Installing a wood-burning fireplace, one decision at a time
A ferrous damper worked from inside the room
The code calls for a damper made of ferrous metal in every masonry fireplace. It sits above the opening, and you must be able to work it from inside the room. Closed, it shuts the flue when the fire is out, and it opens fully while a fire burns. Its position also affects the throat proportions.
We specify the damper in the proposal and show you how to operate it at handover. Some owners prefer a damper at the top of the flue, which is a different product with its own instructions. We explain the choice and whether it replaces or joins the throat damper.
Wood trim near a masonry opening
Combustible trim may sit on the face of a masonry fireplace, but not within a set distance of the opening. Trim close to the opening may project only a little. Edges of flooring, siding and drywall may meet the masonry at points the code defines.
We mark those limits on the masonry face so your finish carpenter can work to them. If a design sketch shows trim closer than allowed, we explain the change it needs. The goal is a face that looks right and keeps wood out of the hot zone.
Which way the outside air intake should face
Some manuals suggest pointing the outside air intake toward the winds that prevail while the fireplace is in use. Wind blowing into the intake helps supply air, while wind across it can pull against the fire. The intake hood and its screen come with the listed kit.
We look at the sides of the house available for the intake and weigh that advice against the code's location rules. Where the ideal side is not practical, we explain the compromise. The chosen location is shown on your written record.
A short chase built on the roof
Where the chimney rises through the house, it may still need a chase above the roof for looks or to reach the required height. Manuals show chases built on the roof as one of the standard arrangements. The chase top and termination then sit higher than a bare pipe would.
We explain how a rooftop chase is framed, clad and tied into the roof. It changes the roof silhouette and adds work, so it is priced as its own item. Some owners prefer the plain listed pipe and termination instead.
Installation items you approve before work begins in Miramar
- Proposed fireplace location and room use
- Roof opening and termination cap
- Noncombustible board and face materials
- Grate, screen and supplied accessories check
New fireplace questions, answered plainly
Will the building official need to see the work?
That depends on the job and the jurisdiction. Fireplace manuals tell owners to ask local building or fire officials about inspections before work begins. We explain what may apply to your project and keep walls open until any required check is done.
Why does a brand new fireplace smell during early fires?
Manuals describe an industrial odor while oils and binders burn off and the paint cures. It is expected during the break-in fires. Ventilate the room while it lasts, and tell us if the smell continues well beyond that period.
What paperwork do we keep after the installation?
You keep the manual, the listing details, the completed installation checklist and our written record of the work. The record names the model, serial number, chimney parts and clearances confirmed. Keep them together for future service.
More Ways to Care for Your Fireplace
- Gas Fireplace Repair and ServiceGet a model-specific gas fireplace service plan for the fault you are seeing or the maintenance your unit needs.
- Gas Fireplace InstallationCreate a complete gas fireplace installation plan for the room, appliance and connected systems.
- Chimney Damper Repair and ReplacementRestore a usable damper mechanism after checking the plate, frame and control linkage.
- Chimney Animal RemovalAssess occupied chimney openings and plan appropriate follow-up cleaning or entry protection.
Proudly American
Local service. Careful repairs. A fireplace worth coming home to.
Call Now (645) 465-4171We received your request
Our team will contact you to arrange your inspection.
Chimney & Fireplace Brands We Work With
DuraVent 
Olympia Chimney and Venting 
Copperfield Chimney Supply 
Rutland 
Heatilator 
Heat & Glo